|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-08-2013, 08:40 PM | #1 |
Not Yet Wild
Join Date: Jun 2012
Posts: 8
|
Need help with ignition wiring on an elect 97 EZGO
I just bought a 97 ezgo where the owner bypassed the ignition switch because he lost the keys. I ordered a new switch and was trying to figure out how the switch gets wired. I cant seem to figure out how the previous owner rewired the cart so that it does not need a key. From what I have already researched, it seems he must have done a bypass at the F/R switch. If someone could show me a pic or describe how this switch is wired I would appreciate it.
From what I have been able to trace back to the controller (alltrax), there are three wires coming from that area - orange, green and black. The only one hooked up right now is the green one, it is attached to the top of the F/R switch. If I remove this wire, the cart will not work. With it on, the cart is always "on"...have to keep in neutral - front and reverse operate fine. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-09-2013, 01:10 AM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Need help with ignition wiring on an elect 97 EZGO
I posted some stuff in your other thread.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
ezgo elect | Electric EZGO | |||
96 ezgo elect diff oil ? | Electric EZGO | |||
Help with Elect. EZGO! | Electric EZGO | |||
First Post - HELP! w/elect EZGo | Electric EZGO |