lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 03-04-2016, 05:28 PM   #1
del50man
Gone Wild
 
del50man's Avatar
Club Car
 
Join Date: Mar 2013
Posts: 307
Default Changing out front spindles

I am sure someone has probably asked this, but I am changing my spindles out on the front of my Club Car. How do I go about getting the hub off the old spindles?
del50man is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 03-04-2016, 05:41 PM   #2
TahoeDawgZ71
revolutiongolfcars.com
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
Default Re: Changing out front spindles

I'm assuming you're working on a Precedent. Once you take off the retaining nut it should slide right off easily. If it doesn't, the bearing is rusted to the spindle and it may take a little persuasion with a hammer. Be careful not to damage the spindle when you're beating the hub off. Sand the rust down and make it nice and smooth before you re-install the new hub and it should slide on very easily.
TahoeDawgZ71 is offline   Reply With Quote
Old 03-04-2016, 05:42 PM   #3
crash test dummy
Guest
 
Posts: n/a
Default Re: Changing out front spindles


2:19 is the removal of the hub
  Reply With Quote
Old 03-04-2016, 05:45 PM   #4
del50man
Gone Wild
 
del50man's Avatar
Club Car
 
Join Date: Mar 2013
Posts: 307
Default Re: Changing out front spindles

Mine does not have the retaining nut with the cotter pin.
del50man is offline   Reply With Quote
Old 03-04-2016, 05:48 PM   #5
crash test dummy
Guest
 
Posts: n/a
Default Re: Changing out front spindles

then follow daves removal

note always give make , model & year of cart when posting
  Reply With Quote
Old 03-04-2016, 06:43 PM   #6
del50man
Gone Wild
 
del50man's Avatar
Club Car
 
Join Date: Mar 2013
Posts: 307
Default Re: Changing out front spindles

Ok, it took some time to get the hub off. Gotta love rusted on nuts that go to the steering arm.
del50man is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
g1 front knuckle spindles? Golf Carts and Parts
Front spindles Gas EZGO
WTB 89-up front spindles!! Asap Golf Carts and Parts
WTB cc newer front spindles and hubs Golf Carts and Parts
2003 TXT front spindles Gas EZGO


All times are GMT -5. The time now is 08:16 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.