|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-21-2016, 07:02 PM | #1 |
Not Yet Wild
Join Date: Feb 2016
Location: West Henrietta
Posts: 2
|
What is the proper torque for battery hold downs?
Installing 8 volt Trojans in a 2009 Precedent with the T shaped holddowns. Is there a particular torque for the hold down bolts? I don't want them moving around and I don't want to crush the batteries.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-21-2016, 07:57 PM | #2 |
Guest
Posts: n/a
|
Re: What is the proper torque for battery hold downs?
the hold down will break before the batteries
i snug them down til the batteries don't wiggle |
04-21-2016, 08:09 PM | #3 |
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: What is the proper torque for battery hold downs?
10 in lbs.
|
04-21-2016, 08:48 PM | #4 |
Guest
Posts: n/a
|
Re: What is the proper torque for battery hold downs?
|
04-21-2016, 09:05 PM | #5 |
Gone Wild
Join Date: Dec 2011
Location: Hampton, GA
Posts: 467
|
Re: What is the proper torque for battery hold downs?
|
04-21-2016, 09:05 PM | #6 |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: What is the proper torque for battery hold downs?
Are you sure it's not 10 ft lbs? 10 in lbs isn't much torque at all...
|
04-21-2016, 11:00 PM | #7 |
Not Yet Wild
Join Date: Feb 2016
Posts: 17
|
Re: What is the proper torque for battery hold downs?
Not Club Car, but the Yamaha Drive manual has the following specs:
Battery hold downs: 62-80 in/lb Battery cables/terminals: 80-89 in/lb |
|
|
Similar Threads | ||||
Thread | Forum | |||
Battery hold downs absent | Electric Club Car | |||
Battery Hold downs | Electric Club Car | |||
How many battery hold downs are used on a 1983 ez-go? | Electric EZGO | |||
Battery hold downs on Melex | Melex | |||
battery hold downs | Electric Club Car |