2008 MPT 1000 reverse beeper

Duster · 08-20-2013, 09:59 AM

My cart has quit running. I've had the reverse beeper disconnected for a long time, so I hooked it back up to get the codes. It beeps in reverse even with the key off. Is this normal? Been so long I can't remember if it beeps with the key off.

Thanks,
Duster

yurtle · 08-20-2013, 10:21 AM

My 1998 series TXT series with an AXE4855 beeps in reverse even with key off, and that's normal for it. Can't speak for your setup, but it's a safety feature that keeps you from turning on the key and punchin' it without much warning.

Duster · 08-20-2013, 08:43 PM

Question about diagnostics mode. Here's the instructions I have read:

To enter PDS diagnostics mode turn the key switch off, move the run/tow switch to run, move the direction switch from neutral to reverse 5 times. Your cart will beep to confirm you are in diagnostics mode

According to the above, you end up in reverse. But in reverse, the beeper is constantly sounding (since you're in reverse). Should I click it one more time back to neutral?

Thanks,
Duster

kgsc · 08-20-2013, 08:47 PM

Yes, it means 5 cycles from N to R ending up in N

08-20-2013, 09:59 AM	#1
Duster Not Yet Wild Join Date: Jul 2010 Posts: 6	2008 MPT 1000 reverse beeper My cart has quit running. I've had the reverse beeper disconnected for a long time, so I hooked it back up to get the codes. It beeps in reverse even with the key off. Is this normal? Been so long I can't remember if it beeps with the key off. Thanks, Duster
Duster Not Yet Wild Join Date: Jul 2010 Posts: 6

08-20-2013, 10:21 AM	#2
yurtle Gone Mad Join Date: Oct 2009 Location: Buford, GA Posts: 8,988	Re: 2008 MPT 1000 reverse beeper My 1998 series TXT series with an AXE4855 beeps in reverse even with key off, and that's normal for it. Can't speak for your setup, but it's a safety feature that keeps you from turning on the key and punchin' it without much warning.

08-20-2013, 08:43 PM	#3
Duster Not Yet Wild Join Date: Jul 2010 Posts: 6	Re: 2008 MPT 1000 reverse beeper Question about diagnostics mode. Here's the instructions I have read: To enter PDS diagnostics mode turn the key switch off, move the run/tow switch to run, move the direction switch from neutral to reverse 5 times. Your cart will beep to confirm you are in diagnostics mode According to the above, you end up in reverse. But in reverse, the beeper is constantly sounding (since you're in reverse). Should I click it one more time back to neutral? Thanks, Duster
Duster Not Yet Wild Join Date: Jul 2010 Posts: 6

08-20-2013, 08:47 PM	#4
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,187	Re: 2008 MPT 1000 reverse beeper Yes, it means 5 cycles from N to R ending up in N

Similar Threads
Thread	Forum
WIll 48V kill my 36V reverse beeper ?	Electric Club Car
No forward, no reverse, no BU beeper	Electric EZGO
Regen brakeing and reverse beeper	Electric EZGO
Reverse beeper wiring	Electric EZGO
reverse beeper	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum