|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-14-2015, 09:45 AM | #1 |
Not Yet Wild
Join Date: Apr 2015
Location: Kentucky
Posts: 7
|
!1999 Ezgo TXT engine swap
Hey, i have a 1999 EXGO and and i swapingthe engine for a 2003 and the linkage looks to be different on the newer engine, has anyone else done this and, what was your solution?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-16-2015, 07:20 PM | #2 |
It ain't gonna be easy.
Join Date: Apr 2008
Location: St. George, SC
Posts: 1,480
|
Re: !1999 Ezgo TXT engine swap
Can you put up some pics?
|
04-16-2015, 09:28 PM | #3 |
Hammer Down !!!!
Join Date: Jun 2010
Location: Lake Geneva, WI
Posts: 2,681
|
Re: !1999 Ezgo TXT engine swap
2003 is an "MCI" engine, your original 1999 was pre-MCI (although they do have the same mounts and displacement and appearance-wise are similar motors). The linkage, coils, ignition system, heads, exhaust manifold, and a few other things are not cross-compatible so You'll definitely have your tasks cut out to swap an MCI into a pre-MCI cart.
Personally, I'd give one of the site sponsors a ring and let them know what You have going on - they can let You know what You're going to need to replace (besides the obvious, which is the motor) and can steer You in the right direction as to parts, etc. |
04-16-2015, 10:04 PM | #4 |
It ain't gonna be easy.
Join Date: Apr 2008
Location: St. George, SC
Posts: 1,480
|
Re: !1999 Ezgo TXT engine swap
I thought that may have been it but couldn't remember the MCI change over time frame. Thx Brew
|
04-17-2015, 08:55 AM | #5 |
Not Yet Wild
Join Date: Apr 2015
Location: Kentucky
Posts: 7
|
Re: !1999 Ezgo TXT engine swap
Well i got the new engine in place last night anf the only thing different that i can see so far is the the throttle linkage. Everything else looks to be the exact same on the newer engine. Coil and ignition is the same as the old engine as well so, i dont think that will be an issue. I will keep you updateed as i get into hooking everything up>
|
04-17-2015, 09:11 AM | #6 |
Hammer Down !!!!
Join Date: Jun 2010
Location: Lake Geneva, WI
Posts: 2,681
|
Re: !1999 Ezgo TXT engine swap
look at the two exhaust manifolds - if they are the same then your new engine is not a 2003, it's mid-2002 or older. If they are different, You do in fact have an early MCI engine you are swapping into the cart and will need to address the differences or You'll have issues. The MCI manifold is a cast single-outlet and the pre-MCI has a "Y-pipe" collector (also cast) if that helps ...
As to the linkage, the carbs are compatible cross-platform so feel free to swap them out |
04-17-2015, 09:41 AM | #7 |
It ain't gonna be easy.
Join Date: Apr 2008
Location: St. George, SC
Posts: 1,480
|
Re: !1999 Ezgo TXT engine swap
That's why I was hoping he could take some pics
|
04-17-2015, 09:55 AM | #8 |
Not Yet Wild
Join Date: Apr 2015
Location: Kentucky
Posts: 7
|
Re: !1999 Ezgo TXT engine swap
Brew, I will have to look later when i get home but, i am all but sure the exhaust is the exact same on both engines. I know the mufflers are the same. As far as the year, i took the engine out of a 2003 so, i just assumed it was the orginal.
Sccowby, i have some pictures but they dont really show anything other than the different hook ups. I will try and take some when i get a chance. |
04-17-2015, 09:59 AM | #9 |
It ain't gonna be easy.
Join Date: Apr 2008
Location: St. George, SC
Posts: 1,480
|
Re: !1999 Ezgo TXT engine swap
ok cool
|
04-17-2015, 12:13 PM | #10 |
Hammer Down !!!!
Join Date: Jun 2010
Location: Lake Geneva, WI
Posts: 2,681
|
Re: !1999 Ezgo TXT engine swap
well that's a good thing if they're the same - they did switch the linkage between the governor and carb but I don't recall exactly when (I want to say with the 2001.5 year as that's when they switched the shift cabling system, etc too but that's not important) ... You should be fine to swap the old linkage out from the donor cart from the governor to the carb, if that's not an option (IE You only have the engine) then personally I'd modify the cable from the pedal to go directly to the carb but if You do, You'll have to drive carefully at top end to keep from flirting with / bouncing off the rev limiter.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGO engine swap | Lifted Golf Carts | |||
1999 EZGO A100 w/a EH290 engine | Gas EZGO | |||
EZGO engine swap | Big Block Talk! | |||
84 EZGO Engine Swap | Gas EZGO |