lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 08-02-2018, 02:56 AM   #11
Kenny0322
Not Yet Wild
 
Join Date: Aug 2018
Posts: 3
Default Re: Ezgo throttle testing

Would you reccomend using an female and an male terminal connector rather than using a butt splice connecter? It's easier for me to distinguish a good crimp per wire splice.
Kenny0322 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 08-03-2018, 08:28 AM   #12
BobBoyce
Gone Insane
E-Z-GO
 
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,925
Default Re: Ezgo throttle testing

Quote:
Originally Posted by Kenny0322 View Post
Would you reccomend using an female and an male terminal connector rather than using a butt splice connecter? It's easier for me to distinguish a good crimp per wire splice.
It is much harder to weatherproof connections with the commonly available unpluggable connectors.
BobBoyce is offline   Reply With Quote
Old 11-23-2018, 09:13 PM   #13
EzgoTXT2002
Getting Wild
 
EzgoTXT2002's Avatar
E-Z-GO
 
Join Date: Nov 2018
Location: Ringgold, Georgia
Posts: 149
Default Re: Ezgo throttle testing

Quote:
Originally Posted by BobBoyce View Post
It is much harder to weatherproof connections with the commonly available unpluggable connectors.
Dielectric grease or even petroleum jelly does wonders water proofing and preventing corrosion.

Sent from my SM-G930P using Tapatalk
EzgoTXT2002 is offline   Reply With Quote
Old 08-01-2019, 02:15 PM   #14
sahkanaga
Not Yet Wild
 
Join Date: Jun 2019
Location: Alabama
Posts: 18
Default Re: Ezgo throttle testing

When I perform the test for SR controller (SR48300, Marathon pre 1994.5) I am getting 4.67V instead of the 8-10V shown. I get this reading as soon as I turn the KS on and also when the SOL just engages. What's wrong?
sahkanaga is offline   Reply With Quote
Old 09-10-2020, 10:55 AM   #15
Calvin Martin
Not Yet Wild
 
Join Date: Aug 2020
Posts: 1
Default Re: Ezgo throttle testing

Newbie here so please forgive and redirect if this info is elsewhere. All upgraded everything with new motor, batteries and solenoid in older series TXT. New motor ran great for 3 weeks but then started only running about 1/2 speed with almost no torque even at full throttle. Molex connector cleaned. Batteries new as noted and all have good charge. Even checked individual cells with hydrometer. I am reading 8.8 volts across the ITS white and black blade connectors Thoughts on my apparent lack of power? Could this be the ITS? Thanks
P.S. - controller is 700 amp FSIP that is about 5 years old, all cables and F R switch upgraded and heavy duty. Solenoid is SW 200 and was upgraded due to this issue.
Calvin Martin is offline   Reply With Quote
Old 04-10-2021, 10:36 AM   #16
gtpvette
Not Yet Wild
 
Join Date: Apr 2021
Posts: 1
Default Re: Ezgo throttle testing

I'm new here and wanted to say THANK YOU to the OP,,, I was struggling trying to diagnose what the problem was with my cart. Would barely move forward on a full charge and would only try to go in reverse. Put a meter on the ITS output and BINGO,, next to no voltage. Swapped in a $18 one off of Ebay,, holy moly this thing moves now!!!

Thanks Again!!!
gtpvette is offline   Reply With Quote
Old 05-11-2021, 03:42 PM   #17
lawnripper
Gone Wild
E-Z-GO
 
Join Date: Aug 2012
Location: Central America
Posts: 242
Default Re: Ezgo throttle testing

I was looking for the molex plug on my cart since I have some issues happening.. Anyways it was bought to my attention that the PDS system is one run from the pedal box to the controller. No ,Molex plug in between for those with a PDS cart.
lawnripper is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Testing throttle sensors with Arduino... Electric EZGO
DCS controller testing and ITS throttle test Electric EZGO
ITS Throttle Sensor Testing Electric EZGO
Testing 4x4 ezgo Videos
95 EZGO DCS Electric Testing Electric EZGO


All times are GMT -5. The time now is 01:41 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.