|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-28-2018, 05:08 PM | #1 |
Not Yet Wild
Join Date: Aug 2018
Posts: 7
|
Full throttle from stop causing surge
I just got my 1206 5 pin controller back from repair for my TXT series drive. I was told it had got some high current through it. I had replaced my solenoid a while ago when it died on me. Batteries are all good. If i take off slowly it will drive fine but if i punch it it hesitates and will jerk. this is the same symptoms from before. I ordered an OEM solenoid on amazon but i think it was a cheap Chinese knock off. Can the solenoid be to blame and the controller is trying to protect itself from the surge?
also the solenoid doesn't have the rubber feet like the old one. Is there any isolation issues with this? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha G1 Only Runs with full choke and full Throttle | Gas Yamaha | |||
initial throttle surge | Electric EZGO | |||
Full throttle surge/roll away braking | Electric Club Car | |||
Part throttle surge | Electric Club Car | |||
Throttle surge. | Gas EZGO |