|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
01-04-2019, 07:53 AM | #11 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Electronic pedal wiring and conversion
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-04-2019, 06:08 PM | #12 |
Not Yet Wild
Join Date: Nov 2016
Posts: 24
|
Re: Electronic pedal wiring and conversion
Thank you Sergio
|
01-27-2019, 12:53 PM | #13 |
Not Yet Wild
Join Date: Nov 2016
Posts: 24
|
Re: Electronic pedal wiring and conversion
Help. Hooked up all wiring and cables. Vehicle does not respond. Solenoid seems to click, but veh does not move. Took some pics. Hope they reveal something that is missing or hooked up wrong
Thanks |
01-27-2019, 12:55 PM | #14 |
Not Yet Wild
Join Date: Nov 2016
Posts: 24
|
Re: Electronic pedal wiring and conversion
Here are some more pics
|
01-27-2019, 03:26 PM | #15 |
Gone Wild
Join Date: Jan 2015
Location: Seminole Country
Posts: 836
|
Re: Electronic pedal wiring and conversion
I believe we have a similar setup although our pedals may be a little different. My wiring is:
Foot Pedal Yellow Red – Key Switch Blue – Solenoid Small Terminal + Green – Alltrax J5 Black – Alltrax B- |
01-28-2019, 08:19 AM | #16 |
Not Yet Wild
Join Date: Nov 2016
Posts: 24
|
Re: Electronic pedal wiring and conversion
I did a complete conversion. The car does not move. The solenoid clicks with no response from power chain. Checked all wiring according to plan all seems to be good. I am going to check the programming on the sr4800. Would appreciate any advice on where the problem would be. Thanks.
I could send more pictures if need |
01-28-2019, 09:54 AM | #17 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Electronic pedal wiring and conversion
Don't try random wiring connections or you will fry the pedal and/or Controller.
The colors I gave you were specific to the diagram you posted about the throttle. Is the reversing contactor clicking? Please remember that the wiring diagram You posted is not correct for a Reversing contactor with magnetic blowouts, I indicated suggested changes you needed to make in order to correct the wiring. |
01-28-2019, 10:01 AM | #18 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: Electronic pedal wiring and conversion
Connect the computer with tool kit and check for a throttle signal when you press the pedal. If your not getting a signal then something is wired incorrectly. Does the status light on the Alltrax light up when the solenoid clicks?
Sent from my SM-G930R4 using Tapatalk |
01-30-2019, 08:04 AM | #19 |
Not Yet Wild
Join Date: Nov 2016
Posts: 24
|
Re: Electronic pedal wiring and conversion
Thanks for your response. All good advice. It’s working now. Programming was needed.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Excited about electronic rebuild/conversion | Lifted Golf Carts | |||
2 Different Electronic Component Hook Up&Wiring ?? | Gas Yamaha | |||
DCS to FSIP fx302 conversion solenoid not dropping with pedal up. | Electric EZGO | |||
Did conversion - no go after taking foot off the pedal!? | Electric Club Car | |||
electronic ignition conversion | Gas EZGO |