22-32 AWG Wire Fork Connectors?

[flyons78]

Anyone know where to buy wire connectors (fork or ring) for super small wire in the 22-32 AWG range? Can't seem to find them on Amazon.

[Bobbob]

https://www.ebay.com/itm/18-22-GAUGE...-/292130709738

Try this place on eBay I purchased some terminals from them. The site was recommended to me by Sergio during his leaf build.


Sent from my iPad using Tapatalk

[WalterM6]

If you are worried about getting a good connection with the crimp remove the plastic protector and crimp and solder. For added protection use a piece of heat shrink where the plastic protector was.

[Bobbob]

I looked around to many specialized web sites for 32 gage forked wire connectors. I could not find any that went that small. What I would do is use the 22 gage fork connectors fold the bare wire in half and crimp and solder using heat shrink tubing. Just like walterm6 said in his post.


Sent from my iPad using Tapatalk

[flyons78]

Originally Posted by Bobbob

I looked around to many specialized web sites for 32 gage forked wire connectors. I could not find any that went that small. What I would do is use the 22 gage fork connectors fold the bare wire in half and crimp and solder using heat shrink tubing. Just like walterm6 said in his post.


Sent from my iPad using Tapatalk

Awesome advice from both of you! I will do as you suggest.

Walter - Thanks for chiming in! I almost DM'd you. It was actually your picture from your Lifepo4 setup that made me think you had a fork or ring connector for your BMS wires. I could see the heatshrink and its what made me think that.

You wouldn't happen to have a closeup of your LIFEPO4 pack with the BMS wires attached? I've never connected a BMS before and the english is a little broken on the wiring instructions. A picture would go a long way to make sure I don't incorrectly connect something.