99 ezgo Z-bracket ?

[cjcustoms]

99 gas txt eight inch lift and 23' tires and wheels, was told need a Z- braket to lower front of motor frame..

Any one have any pictures of a Z-bracket or and any sizes of drop or any info on this problem.

[scottyb]

Typically any gas cart with more than a 6 inch lift kit will wind up with the motor sloping too much. I do not know of any kit or Z bracket? But it may exist. The oil in the motor could all flow to the rear of the engine and the oil pick up tube is sort of at the front of the engine. There is only 1/5 qts in the engine so add a hill climb into the equation and you could be sucking air instead of oil. It may not be that drastic ... on my high lifted workhorse I lowered the front of the engine cradle a few inches. Pictures won't help because nothing was stock. That is basically what you are asking about, a way to lower the front of the engine. I think you will have to make something Custom.

[cjcustoms]

Ya i was wondering about that, making something custom, any ideas