|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-12-2011, 09:13 PM | #1 |
Not Yet Wild
Join Date: May 2008
Posts: 12
|
removing inner sheave 89 C.C.
I took out the center bolt on the primary clutch and the outer part of the clutch came right off and left the inner sheave on the shaft. How does the inner come off I have held it in the air and beat on the end of the crankshaft (using a board as to not wreck the end of the crank) I tried some heat, a puller gently it will not move. How does it come off?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-13-2011, 03:23 PM | #2 |
Not Yet Wild
Join Date: May 2008
Posts: 12
|
Re: removing inner sheave 89 C.C.
Nobody out there has a clue to help me?
|
07-13-2011, 10:49 PM | #3 |
Gone Wild
Join Date: Aug 2009
Location: Eldon Missouri
Posts: 977
|
Re: removing inner sheave 89 C.C.
There is a puller specifically designed to do this job Mitch. Check with the site sponsors. It runs around $40 but is invaluable. Here's a link to what it looks like;
http://cgi.ebay.com/CLUB-CAR-GOLF-CA...sh=item5198383 |
07-14-2011, 01:34 PM | #4 |
Not Yet Wild
Join Date: May 2008
Posts: 12
|
Re: removing inner sheave 89 C.C.
Thanks for the help I got it off last night.
|
Tags |
flathead kf89 |
|
|
Similar Threads | ||||
Thread | Forum | |||
g2 primary sheave | Gas Yamaha | |||
Machined Sheave | Lifted Golf Carts | |||
sheave | Gas Yamaha | |||
Pully(sheave) removal | Gas EZGO | |||
G2 Sheave noise | Gas Yamaha |