|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-08-2008, 01:08 PM | #1 |
Not Yet Wild
Join Date: Jun 2008
Location: Brick NJ
Posts: 36
|
Need HELP......
Hi I'm new to the golf cart thing, I just picked up a 1998 yamaha cart and it was working fine until I fixed it.
I installed lights and cleaned all the battery terminels and when I put it back together I crossed the last terminal on the last battery. I guess I burned somthing out. I pulled the motor and cleaned the armiture and brushes still wont go top speed, I even tried my buddys motor and still the same. SO THEN I thought I could try the motor directly off the batterys by using a set of jumper cables now I have to push it to the shed it wont move at all. I can here the selonoid clicking but there is no power going back to the motor wires,I checked the in line 10 amp fuse and thats ok i dont have a clue what else to do (Please help I need it for camping next weak) THANKS |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-09-2008, 07:54 PM | #2 |
Not Yet Wild
Join Date: Jun 2008
Location: Brick NJ
Posts: 36
|
Re: Need HELP......
Well I tryed it again. and I am makeing progress, I was able to get the motor to spin by connecting the s1 and s2 with a jumper and then connecting the
a1 and a2 with a set of battery cables going directly to the + and - off 36 volts of the battery. But it still will not power up if I re connect it and try the gas peddle I can here the selonid pick up but thats all that happens. any help would be greatly apprecieated. Thanks.... Rich |
06-09-2008, 08:10 PM | #3 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: Need HELP......
Welcome to BGW
PLEASE DO NOT HOOK THE MOTOR UP THAT WAY!!! You will burn it up. Use this to test your motor. http://www.empinc.biz/tech_support.p...troller_series What make, model cart do you have. I will try and find you a wiring diagram. |
06-09-2008, 08:15 PM | #4 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: Need HELP......
Is it a 1998 G16E?
|
06-09-2008, 08:15 PM | #5 |
Not Yet Wild
Join Date: Jun 2008
Location: Brick NJ
Posts: 36
|
Re: Need HELP......
Thanks for the reply. That was a one shot deal...... I figured i had already burned it up anyway. I was supprised to see it spin, I thing i burnt up the controller though thanks for the wireing diagram..
|
06-09-2008, 08:18 PM | #6 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: Need HELP......
Did anything spark beside the last connection? You may be fine...you just have battery cables wired wrong.
|
06-09-2008, 08:19 PM | #7 |
Not Yet Wild
Join Date: Jun 2008
Location: Brick NJ
Posts: 36
|
Re: Need HELP......
Yes 1998 g16 I don't Know about (E) I guess that stands for electric
|
06-09-2008, 08:21 PM | #8 |
Not Yet Wild
Join Date: Jun 2008
Location: Brick NJ
Posts: 36
|
Re: Need HELP......
I don't think so I checked it over and over, Thats where I went wrong in the beginning. in a hurry not paying attention
|
06-09-2008, 08:25 PM | #9 |
Not Yet Wild
Join Date: Jun 2008
Location: Brick NJ
Posts: 36
|
Re: Need HELP......
Like I said I can here the selonoid picking. but thats all that happens
|
06-09-2008, 08:31 PM | #10 |
Not Yet Wild
Join Date: Jun 2008
Location: Brick NJ
Posts: 36
|
Re: Need HELP......
I wish I had that diagram before
Thanks alot Roady89 |