|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-24-2012, 05:42 PM | #1 |
Not Yet Wild
Join Date: Feb 2012
Posts: 3
|
jacobsen 1110 wont start
Hello
I am working on a jacobsen 1110 hauler with the robin 350 engine I was told that they are the same as the e-z-go work horse I have installed a new aftermarket starter generator, battery 450cca, voltage regualtor, carb. The machine wont fire, Tested both plugs and they are sparking. If I put on the battery charger with it on boost so another 250 amps the starter will spin fast and the machine will start. If I go drive it so the engine warms up and let it turn off it will restart no problem. But left overnight it will not start. Also while in the no starting senerio if I pull the crank breather hose off of the aircleaner housing the machine will start. I did a compressoin reading and only got high 60s. Is there a compression relief system for starting? Any thing else I should consider? Thanks for your help Bob |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-25-2012, 05:09 AM | #2 |
Gone Wild
Join Date: May 2011
Location: Las Vegas NV
Posts: 330
|
Re: jacobsen 1110 wont start
Compression should be about 120 psi per cylinder, at least.
|
02-25-2012, 09:45 PM | #3 |
Gone Wild
Join Date: Jan 2012
Location: Kansas City, Mo
Posts: 544
|
Re: jacobsen 1110 wont start
Cold Cranking amps needs to be 650 or better in all of the ezgo's I have had seems to work best.
|
02-26-2012, 05:29 PM | #4 |
Not Yet Wild
Join Date: Feb 2012
Posts: 3
|
Re: jacobsen 1110 wont start
Is there a compression relife on these engines?
I guess I just went to NAPA and bought a battery that was the same group size. Should there be air coming out of the crank breather at all operation even starting? Don't remember if the pully on the starter/generator was the same size as the original, How big should he pully be-mabey a bigger pully would spin it fast enough Thanks Bob Last edited by watertownbob; 02-26-2012 at 05:31 PM.. Reason: more info i just remebered |
02-29-2012, 04:57 PM | #5 |
Not Yet Wild
Join Date: Feb 2012
Posts: 3
|
Re: jacobsen 1110 wont start
found problem valves were out of adjustment
compression before was 68 after adjustment above 110 runs and starts good |
02-29-2012, 05:43 PM | #6 |
Gone Wild
Join Date: May 2011
Location: Las Vegas NV
Posts: 330
|
Re: jacobsen 1110 wont start
Congratulations! And enjoy.
|
03-01-2012, 06:04 AM | #7 |
Gone Wild
Join Date: Jan 2012
Location: Kansas City, Mo
Posts: 544
|
Re: jacobsen 1110 wont start
|
|
|
Similar Threads | ||||
Thread | Forum | |||
What year is my Jacobsen 1110 Hauler | Gas EZGO | |||
what year is my jacobsen 1110? | Gas EZGO |