05-15-2007, 07:44 PM | #1 |
WILD
Join Date: May 2007
Location: lebanon county,pa
Posts: 1,266
|
motorcycle engine!!!
what would i need to put a motorcycle engine in my ezgo and how could i mount up a tranny if i need to im thinkin of dropping one in because 20mph safely doesnt cut it anymore i need something that would turn heads at swap meets i want something that fast as heck but still reliable i might just get a rolled 4 wheeler and drop the front end of it in the golf cart and the engine and tranny
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-16-2007, 05:03 AM | #2 |
Gone Wild
Join Date: Dec 2006
Location: St. Johns /Jacksonville
Posts: 2,383
|
It can be done, you might have to chain drive it and then you wont have reverse!! But no doubt it can be done I've seen plenty
|
05-16-2007, 06:43 AM | #3 |
Site Moderator
Join Date: Dec 2006
Location: Tennessee
Posts: 2,008
|
I am in the process of getting everything together to do the same thing for my ezgo. I am actually going to use a 4 wheeler motor and the entire rear suspension in mine though. This will change the back end to a mono shock rear swing arm suspension and chain driven. The reason I have chosen the 4 wheeler motor is so that I will still be able to have a reverse....
|
05-16-2007, 07:41 AM | #4 |
Gone Wild
Join Date: Dec 2006
Location: St. Johns /Jacksonville
Posts: 2,383
|
Thats the way to do it Mike that way you will have reverse and and still have plenty of power!!!!!
|
05-16-2007, 07:45 AM | #5 | |
Site Moderator
Join Date: Dec 2006
Location: Tennessee
Posts: 2,008
|
Quote:
|
|
05-16-2007, 08:04 AM | #6 | ||
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,868
|
Quote:
|
||
05-16-2007, 08:17 AM | #7 | |||
Site Moderator
Join Date: Dec 2006
Location: Tennessee
Posts: 2,008
|
Quote:
By the way I did tell you yesterday that I had found a donor 4 wheeler. I just haven't had time to tell you that I had went to pick it up. I got a quad runner 230 4 wheeler with a good motor and new bearings in the swing arm... The front is totaled out. |
|||
05-16-2007, 08:37 AM | #8 | ||||
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,868
|
Quote:
|
||||
05-16-2007, 09:29 AM | #9 |
Gone Wild
Join Date: Dec 2006
Location: St. Johns /Jacksonville
Posts: 2,383
|
The front shouldnt be too hard I guess you have to center it and drill some holes and bolt it to the frame.
|
05-16-2007, 09:56 AM | #10 | |
Site Moderator
Join Date: Dec 2006
Location: Tennessee
Posts: 2,008
|
Quote:
|
|