|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-15-2013, 11:16 AM | #1 |
Not Yet Wild
Join Date: Dec 2012
Location: Kentucky
Posts: 42
|
G2 - Dabg, Still not clear on Spacer for Torque Kit
Everything I have read says throw away existing snap ring - OK - no problem.
Is the spacer in the kit added to my old existing spacer, or does it replace my old spacer? In other words, when I'm done, will I have one spacer or two? Subject line should read "dang". (12 hr night shift) Thanks, Trent |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-15-2013, 04:30 PM | #2 |
Gone Wild
Join Date: Sep 2010
Location: ontario
Posts: 182
|
Re: G2 - Dabg, Still not clear on Spacer for Torque Kit
Hi I know on g16 u use one spacer.
|
03-15-2013, 04:46 PM | #3 |
Gone Wild
Join Date: Jan 2011
Location: Las Vegas, Nevada
Posts: 1,942
|
Re: G2 - Dabg, Still not clear on Spacer for Torque Kit
Just one
|
03-15-2013, 04:59 PM | #4 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: G2 - Dabg, Still not clear on Spacer for Torque Kit
Remove the original spacer,Install the new one,it replaces the original and the snap-ring.
|
03-15-2013, 07:07 PM | #5 |
Not Yet Wild
Join Date: Dec 2012
Location: Kentucky
Posts: 42
|
Re: G2 - Dabg, Still not clear on Spacer for Torque Kit
Thanks guys. The governor is out, new seals installed, clutch is assembled.
The powder coater guy should finish the frame on Monday. Trent |
03-15-2013, 08:28 PM | #6 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,433
|
Re: G2 - Dabg, Still not clear on Spacer for Torque Kit
Snap ring will break with a larger spring in the secondary. It might eventually break after this many years behind the stock clutch. Mine is still on there, I have a spacer but not put it on yet. Mine is actually bent over lol (w/stock spring). I plan to machine the sheave soon here and don't really run it much in the winter anyway, mostly working on it so its ready for summer. It was fun in the snow however.
The clutch needs to sit in the same spot, so you have to remove the snap ring to make that happen with the spacer. It sits on the splines instead of the groove. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Alt Clear Coating | Body and Paint | |||
paint to clear | Body and Paint | |||
Clear Coating | Body and Paint | |||
Clear coat ???? | Design Center | |||
I would like to clear a few things up | Gas Yamaha |