|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-16-2011, 09:39 AM | #1 |
Not Yet Wild
Join Date: May 2011
Posts: 6
|
Burned controller -- Can you ID this IC OR Resistor?
I have an EZGO PDS with a Curtis 1206MX controller. Due to a wiring mistake two components in the controller burned up. I am confident in my ability to repair the controller and save the $$ but I need to identify resistor and IC that burned up. As you can see from the attached pictures the damage from the burn-up prevents me from reading color bands and IC markings.
Can anybody share an up close picture of their 1206MX board so that I can read the resistor color bands and Q3 IC markings? OR Can anybody provide that information to me directly? Thanks! Close ups of the burned parts that I need Identified. http://www.mymegabyte.com/1206mxclose1.jpg http://www.mymegabyte.com/1206mxclose2.jpg Blurry picture of the whole board with burned parts circled. http://www.mymegabyte.com/1206mx2.jpg (I external linked the pictures so I could post high-res) -- Edit -- Currently, the resistor measures 1.8k but obviously damage could have changed that. |
|
|
Similar Threads | ||||
Thread | Forum | |||
1990 CC - Resistor to Controller | Electric Club Car | |||
5TH speed resistor has a burned mark on resistor board and melted the wire | Electric EZGO | |||
91 DS wont run after controller burned up | Electric Club Car | |||
Resistor to controller | Extreme DC! | |||
82 resistor to controller | Electric EZGO |