sepex controler question

[chriswilcox]

I have a star 48v cart with a sepex 1268 controller how do I wire in the mode switches. I have read that you can hook up a mode swith to put it on mode 1 and they come from the factory in mode 2 any info would be great

[kgsc]

Here is a link to the manual. http://www.fsip.biz/Documents/1268(06A)MANUAL.pdf

You will need a programmer to change the settings.

[chriswilcox]

There is a way to change the mode from 1 to 2 with a switch I'm trying to figure out how to wire it believe it's j17 in the pin out but what power sorce to give it I don't want to give it 48v if it supposed to have less

[kgsc]

Manual says pin 20 but I would not do it until you can verify what the settings are. Could fry something expensive.

[chriswilcox]

Ya that's why I'm asking questions I can't seem to find much information on it

[kgsc]

The manual will tell you almost everything except what it's settings currently are. Need the programmer for that. I put one in a cart a while back and loved it but without the hand held it would have been impossible.

[chriswilcox]

But where to get a controller or someone to set it?

[kgsc]

Revolution, one of the sponsors, http://www.revolutiongolfcars.com/ tahoedawgz71 I believe sells Curtis but programming really needs to be tuned once it is on the cart. Where are you located?

[chriswilcox]

Clearwater fl