|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
09-29-2018, 01:00 AM
|
#1 |
|
Gone Wild
Join Date: May 2016
Posts: 242
|
medalist Alltrax install not going so good.
Got it all hooked up the way explained and no go, It clicks and that is it. Am I missing something? Any ideas as what to do next? please and thank you.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-29-2018, 05:40 AM
|
#2 |
|
Gone Wild
 Join Date: Jul 2018
Location: Central Ohio
Posts: 1,720
|
Re: medalist Alltrax install not going so good.
Did you disconnect the battery and put it in tow?
Pictures of your controller wiring would be helpful |
|
|
|
|
09-29-2018, 11:25 AM
|
#3 |
|
Gone Wild
Join Date: May 2016
Posts: 242
|
Re: medalist Alltrax install not going so good.
Disconnected the battery yes. no tow run switch on it.
|
|
|
|
|
09-29-2018, 11:41 AM
|
#4 |
|
Gone Wild
Join Date: May 2016
Posts: 242
|
Re: medalist Alltrax install not going so good.
Before and Afters.
|
|
|
|
|
09-29-2018, 11:43 AM
|
#5 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: medalist Alltrax install not going so good.
Hi Joel, couple of questions.
1. in the pictures which side of the solenoid has the battery cable attached? Driver or Passenger side? 2. where does the big white wire go that is on the big post? 3. where are the white and black wires that go in the the controller J4 and J5 throttle input terminals? Please post answers as 1. 2. 3. for simplicity |
|
|
|
|
09-29-2018, 11:46 AM
|
#6 |
|
Gone Wild
Join Date: May 2016
Posts: 242
|
Re: medalist Alltrax install not going so good.
Still needing to recover the seats and add some accessories but first this controller issue.
|
|
|
|
|
09-29-2018, 11:53 AM
|
#7 |
|
Gone Wild
Join Date: May 2016
Posts: 242
|
Re: medalist Alltrax install not going so good.
OK Scottyb.
1 . Driver side. 2. Charging port. 3. The blk and white wires from the throttle box are plugged into the J4 and J5 on the controller. |
|
|
|
|
09-29-2018, 11:55 AM
|
#8 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: medalist Alltrax install not going so good.
1. Does the solenoid click when you press the pedal?
2. Does the controller LED light up? |
|
|
|
|
09-29-2018, 11:57 AM
|
#9 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: medalist Alltrax install not going so good.
Sometimes it's hard to see in pictures but, the driver side solenoid cable looks to be going to the controller? Correct me if I'm wrong.
|
|
|
|
|
09-29-2018, 11:58 AM
|
#10 |
|
Gone Wild
Join Date: May 2016
Posts: 242
|
Re: medalist Alltrax install not going so good.
Yes it clicks and I get 4 green then solid green with the petal depressed after click.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Alltrax install help | Electric Club Car | |||
| 95 medalist with new alltrax controller problem | Electric EZGO | |||
| Good Running 295 from 97 medalist/TXT | Golf Carts and Parts | |||
| Alltrax install in G22? | Extreme DC! | |||
| 1995 EZGO Medalist has good power after charge then dies | Electric EZGO | |||
Linear Mode
