|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-10-2011, 02:11 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2010
Location: Canada
Posts: 4
|
96 medalist solenoid testing
Hi,
I believe I have a bad solenoid on my 96 medalist. I have tested the voltage on the small terminals on the bottom of the solenoid and I get 38.6 volts. When press the accelerator i hear a click in the solenoid, but when I test the voltage on the larger terminals i get less than 1 volt, around .2 volts (cart is up on blocks!) should the reading be the same as the smaller terminals? Can i jump the 2 terminal to test it? Marco |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-10-2011, 02:30 PM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 96 medalist solenoid testing
The small terminals are the activation circuit, never connect them to each other.
When the solenoid clicks you should have pack voltage (Positive) on both sides. connect black test lead to battery pack neg. and test 2 big terminals on the solenoid....... |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 1995 Medalist - testing without batteries | Electric EZGO | |||
| Solenoid Testing | Electric Club Car | |||
| Solenoid Testing | Electric Yamaha | |||
| Solenoid Testing | Electric EZGO | |||
| solenoid testing | Electric EZGO | |||
Linear Mode
