|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-05-2013, 09:11 AM | #21 |
EZ come EZ go
Join Date: Apr 2012
Location: Parkland FL
Posts: 1,412
|
Re: Directional Signal upgrade
It's going to look like this. It's tiny man, not really apparent unless you rip pedal apart.
If you have 3 way switch, chances are high it's there. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-05-2013, 04:55 PM | #22 |
Gone Wild
Join Date: May 2012
Location: S. Fl
Posts: 237
|
Re: Directional Signal upgrade
Thanks guys I will crawl under it after work and see what i can find.
|
03-05-2013, 08:04 PM | #23 | |
Gone Wild
Join Date: May 2012
Location: S. Fl
Posts: 237
|
Re: Directional Signal upgrade
Quote:
Also someone posted about two wires tied off on the front drivers side by the wheel well, I got those, what are they for? I have looked at wiring diagrams I could find online but none are true full blown wiring for the harness and its components. |
|
03-05-2013, 09:27 PM | #24 |
Gone Wild
Join Date: Jun 2011
Location: Florida
Posts: 516
|
Re: Directional Signal upgrade
There should be a black and white wire that looks like it plugs into the brake pedal. that should activate the brake lights. You don't need to crawl under the cart to see it. kneel beside the cart on the driver's side and look at the brake pedal. There should be two wires (black and white) that plug into the micro switch. If you have a volt meter there should be 12v on one of them, can't remember which right now, but one should have 12v.
|
03-05-2013, 10:05 PM | #25 | |
Gone Wild
Join Date: May 2012
Location: S. Fl
Posts: 237
|
Re: Directional Signal upgrade
Quote:
|
|
03-07-2013, 06:06 PM | #26 | |
Gone Wild
Join Date: May 2012
Location: S. Fl
Posts: 237
|
Re: Directional Signal upgrade
Quote:
|
|
03-07-2013, 08:22 PM | #27 | |
Gone Wild
Join Date: Jul 2010
Location: Peachtree City, Ga.
Posts: 2,759
|
Re: Directional Signal upgrade
Quote:
|
|
03-07-2013, 11:38 PM | #28 | |
Gone Wild
Join Date: May 2012
Location: S. Fl
Posts: 237
|
Re: Directional Signal upgrade
Quote:
|
|
03-18-2013, 01:02 PM | #29 |
Gone Wild
Join Date: May 2012
Location: S. Fl
Posts: 237
|
Re: Directional Signal upgrade
I am stuck and can’t get the signals to flash or anything. The directions are lacking and read as if you have to cut into the wiring harness. The switch has the correct plug and appears to be plug and play with the EZGO The only part of the process I don’t have connected yet is the new brake pedal, but I don’t think that would cause the whole thing not to work. I have attached pics to help you see what I have.
|
03-18-2013, 02:04 PM | #30 |
EZ come EZ go
Join Date: Apr 2012
Location: Parkland FL
Posts: 1,412
|
Re: Directional Signal upgrade
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Yet another turn signal upgrade for Precedent | Electric Club Car | |||
Wire from directional switch to terminal S2 getting very hot! | Electric EZGO | |||
driven clutch......directional? | Gas Club Car | |||
EzGO Marathon Directional Wireing | Gas EZGO | |||
93 ez-go directional light wiring | Gas EZGO |