|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-08-2013, 10:08 PM | #1 |
Not Yet Wild
Join Date: May 2013
Location: Kentucky
Posts: 9
|
Did I fry my lights?
Ok, I bought a 2007 EZGO TXT Series cart that needed new batteries. It has headlights and tail lights wired to 2 of the batteries. I installed the new batteries and hooked the positive to the post where the positive for the cart is and I wasnt thinking and hooked the negative to the negative post for the cart. Instead of hooking it up to 12V I hooked it to 36V. My son flipped on the lights and they flickered and then the headlights went out and only the passenger side tail light still lights up. I moved the ground to the next battery in the series giving them 12V but I still just have the passenger side tail light. Are the lights fried? Are the bulbs fried? What should my next move be (aside from installing a converter)?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-08-2013, 10:14 PM | #2 |
Guest
Posts: n/a
|
Re: Did I fry my lights?
yep !!! blew the blubs is my guess check blubs first and ALL wires |
05-08-2013, 10:23 PM | #3 |
Not Yet Wild
Join Date: May 2013
Location: Kentucky
Posts: 9
|
Re: Did I fry my lights?
Thanks for the welcome and reply. Thats what I figured. The wires are all fine as far as I can tell. I visually inspected them and they look good. Thanks again.
|
05-08-2013, 10:29 PM | #4 |
Guest
Posts: n/a
|
Re: Did I fry my lights?
when i did this .... yep been there done that ... my rear blubs blew apart !!!
next get fuse in - line |
05-08-2013, 10:51 PM | #5 |
Not Yet Wild
Join Date: May 2013
Location: Kentucky
Posts: 9
|
Re: Did I fry my lights?
Thats the weird thing...there is a fuse in line. I popped out the tail light that went out and it is LED. When I popped off the cover I saw where it burned out the little diode or resistor and it smelled burnt. Now to find replacement lights. I dont really want to buy the whole kit. Lesson learned.
|
05-08-2013, 10:56 PM | #6 |
Guest
Posts: n/a
|
Re: Did I fry my lights?
look like these ?
|
05-08-2013, 11:11 PM | #7 |
Not Yet Wild
Join Date: May 2013
Location: Kentucky
Posts: 9
|
Re: Did I fry my lights?
They are similar. Mine only have 1 row of LEDs instead of 2.
|
05-08-2013, 11:16 PM | #8 |
Guest
Posts: n/a
|
Re: Did I fry my lights?
K.. here they are ... has 3 wires for brake and turn
http://www.ebay.com/itm/EZGO-TXT-Med...item3a71506195 |
05-08-2013, 11:30 PM | #9 |
Not Yet Wild
Join Date: May 2013
Location: Kentucky
Posts: 9
|
Re: Did I fry my lights?
I saw those. I was also looking at these:
http://www.ebay.com/itm/160936676035...84.m1423.l2649 |
|
|
Similar Threads | ||||
Thread | Forum | |||
09 RXV - rear running lights/brake lights | Electric EZGO | |||
Wiring for Head ligths, Tail Lights, Brake Lights and Turn Signals | Gas EZGO | |||
Blew all lights, new tail lights wont get brighter on brake press. | Electric Club Car | |||
Signal lights and brake lights installed | Gas EZGO | |||
04 PDS Lights + Fog Lights = Blown Fuse ? | Electric EZGO |