Reverse buzzer install after controller conversion

Bill · 09-09-2013, 09:26 AM

I ran into this too. I swapped the cam and switches from My old F/R switch.

I wouldn't recomend doing it on the cart since the bakelite is brittle. I held the shaft in a vise for a little control.

09-09-2013, 09:53 AM

they sure look alike to me but im half blind any way

btw where did the link go ?

09-09-2013, 09:26 AM	#11
Bill Getting Wild Join Date: Jun 2008 Posts: 96	Re: Reverse buzzer install after controller conversion I ran into this too. I swapped the cam and switches from My old F/R switch. I wouldn't recomend doing it on the cart since the bakelite is brittle. I held the shaft in a vise for a little control.
Bill Getting Wild Join Date: Jun 2008 Posts: 96

09-09-2013, 09:53 AM	#12
crash test dummy Guest Posts: n/a	Re: Reverse buzzer install after controller conversion they sure look alike to me but im half blind any way btw where did the link go ?
crash test dummy Guest Posts: n/a

Similar Threads
Thread	Forum
wiring a reverse light to the reverse buzzer?	Gas Yamaha
reverse buzzer	Electric Yamaha
Getting ready for 36v/48v conversion & 500a Controller etc install	Electric EZGO
reverse buzzer	Electric Club Car
reverse buzzer?	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum