|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-16-2013, 09:25 PM | #11 |
Not Yet Wild
Join Date: Jul 2013
Posts: 12
|
Re: 97 DS Regen2 Silver Controller Won't Move
Voltage 50.1 through microswitch. V-glide 4.87-1.5. all at the controller.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-17-2013, 10:06 AM | #12 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 97 DS Regen2 Silver Controller Won't Move
Make sure to inspect all wiring for something minor. If all of that looks good, it sounds like a bad controller to me. You've ruled out the OBC by proving that it will boot up and allow the controller to power up. You've eliminated the Potentiometer, You've eliminated the solenoid. It's possible that the motor is bad, but that wouldn't keep the solenoid from clicking.
|
09-17-2013, 12:10 PM | #13 |
Not Yet Wild
Join Date: Jul 2013
Posts: 12
|
Re: 97 DS Regen2 Silver Controller Won't Move
I found a diagram showing how to wire the motor. Tested motor sat.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Cart will not move after installing new controller. | Electric EZGO | |||
Silver solder | Golf Carts and Parts | |||
EZGO Silver E Won't Run | Gas EZGO | |||
Regen2 Cart no go | Electric Club Car |