|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-13-2014, 08:39 AM | #11 |
Getting Wild
Join Date: Aug 2011
Location: Branford, FL.
Posts: 77
|
Where might a fellow order a control board??
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-13-2014, 08:40 AM | #12 |
Getting Wild
Join Date: Aug 2011
Location: Branford, FL.
Posts: 77
|
I did a continuity test with the fuses installed and they passed. Should I pull them and ohm test/continuity test also?
|
06-13-2014, 08:51 AM | #13 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Dpi charger problem
Quote:
https://dpipower.com/store/replaceme...er-boards.html |
|
06-14-2014, 08:25 AM | #14 |
Getting Wild
Join Date: Aug 2011
Location: Branford, FL.
Posts: 77
|
Fuses ohm/continuity test good with 1/4" spades removed. No obvious burnt components in the board. Transformer is outputting like normal.
Should I order a board? |
06-14-2014, 08:31 AM | #15 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Dpi charger problem
I would... it's the only part in it aside from the transformer which you have determined is good. A control board fixes 100% of these chargers in my experience.
|
06-14-2014, 08:48 AM | #16 |
Getting Wild
Join Date: Aug 2011
Location: Branford, FL.
Posts: 77
|
|
06-14-2014, 08:55 AM | #17 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Dpi charger problem
However, make one more continuity check - the ammeter. It isn't shown on the block diagram I posted, but it goes between the transformer center-tap and P3 on the board. If it was open, the board might not power up. (No return path to the transformer) Granted, not very likely, but a possibility, and it's easy to check. |
06-14-2014, 09:01 AM | #18 | |
Getting Wild
Join Date: Aug 2011
Location: Branford, FL.
Posts: 77
|
Quote:
That checks good. Guess it's time to order a board. |
|
06-20-2014, 01:19 PM | #19 |
Getting Wild
Join Date: Aug 2011
Location: Branford, FL.
Posts: 77
|
Control board fixed it.
|
06-20-2014, 02:51 PM | #20 |
Getting Wild
Join Date: Nov 2009
Location: Mayo, FL
Posts: 146
|
Re: Dpi charger problem
good job!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
EZ Go Charger Problem | Electric EZGO | |||
07 Charger Problem | Electric Yamaha | |||
EZ Go Charger Problem | Electric EZGO | |||
Charger problem | Electric EZGO | |||
Charger problem | Electric Yamaha |