|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-30-2014, 10:45 PM | #1 |
Not Yet Wild
Join Date: Nov 2010
Posts: 23
|
Factory vs aftermarket lift
I have a Precedent that was lifted by the factory. The lowere A-arm on the driver's side is bent, so I am looking at replacing it or changing lift. I would like a long travel, but am looking at the Allsport or Jake's 6" double A-arm lifts due to cost. Is there any improvement in ride with either of these vs the factory lift? I'm not sure if the factory lift is an A-arm or spindle lift. My cart also has heavy duty rear springs that are under the axle.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-31-2014, 05:26 PM | #2 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Factory vs aftermarket lift
The Precedent factory lift kit is made by All Sports.
|
07-31-2014, 09:42 PM | #3 |
Not Yet Wild
Join Date: Nov 2010
Posts: 23
|
Re: Factory vs aftermarket lift
Thanks! I am assuming it is a 4" lift then.
|
08-01-2014, 06:14 AM | #4 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Factory vs aftermarket lift
Correct
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Factory CC lift | Electric Club Car | |||
Long Travel lift for 97 CC DS with Factory lift - Will this work? | Electric Club Car | |||
EZ GO factory shocks on a lift... | Lifted Golf Carts | |||
EZGO Factory lift Vs. All the others | Lifted Golf Carts | |||
Ezgo factory lift | Lifted Golf Carts |