|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-27-2015, 01:53 PM | #1 |
Gone Wild
Join Date: Aug 2012
Location: Gilbert SC
Posts: 154
|
Reducer installation questions
I am installing the Madjax MJ1230C 36v 30 reducer. Not exactly sure where to mount it. Was going in fabricate a bracket to mount it in the driver side well. Might as well go ahead and mount a fuse block too.
Just have the radio and the lights. Not exactly sure what to do with the yellow wire that goes all the way back to key switch. Once I figure out the right one, cut off the terminal and strip both crimp back or use a butt splice and add the yellow? Wire size? Best route back the well? Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-27-2015, 02:07 PM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Reducer installation questions
Better review the installation instructions.
The Yellow wire in the converter's pigtail is the B+ input from the battery pack. |
07-27-2015, 02:59 PM | #3 |
Gone Wild
Join Date: Aug 2012
Location: Gilbert SC
Posts: 154
|
Re: Reducer installation questions
Oops was shooting from the hip and my memory is fading. Cart is at the beach and I ain't. Thanks for the correction. I plan on taking it real slow when I get there to avoid the color crossing.
|
Tags |
madjax |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Voltage reducer installation question | Electric EZGO | |||
DC to DC Voltage Reducer Installation | Electric Yamaha | |||
EZGO RXV Won't Move after Voltage Reducer Installation | Electric EZGO | |||
Accessory Installation Questions | Electric EZGO | |||
voltage reducer installation | Electric Yamaha |