High-Speed Walk-away error message on IQ Cart

[triple14]

Afraid that's not my problem. Once I get the cart fixed & in perfect working order, I put the IQDM back on it (cart is on level ground) to give it a final check--that's when the message appears. Guess it could be their way of saying everything's fine, but it's still an annoying message!

[GLEEMO]

So "triple14" what did CC say about the error ?
http://products.adtrack.com/00421/contactus.asp

[triple14]

That they don't know--but the engineers are working on coming out with a new error code listing--that's been over a month ago. A bit aggravating for those of us who do the repairs getting error codes that can't be explained.

[GLEEMO]

I feel your pain, Back in the day this happened with HP 150's (Alarm Point reached) turned out it got left in there by the Developers , OOPS :)

[stang331]

So was the high speed walk away code ever figured out?? I just started getting these codes on our precedents and after deleting all the code history that one stays.

[jakesnake27]

Originally Posted by stang331

So was the high speed walk away code ever figured out?? I just started getting these codes on our precedents and after deleting all the code history that one stays.

Welcome Stang! I have no nothing about these codes, but someone will come along shortly...

[Stevegrmich]

Originally Posted by stang331

So was the high speed walk away code ever figured out?? I just started getting these codes on our precedents and after deleting all the code history that one stays.

. . . from controller manual, but don't know if this helps you . . . maybe the error code is saying the parameter is out of limits? . . .

"The WalkAway current limit parameter sets the maximum field current
applied during WalkAway™ operation. The WalkAway™ function applies field
current to slow a vehicle that is detected as moving while the main contactor
is open. The motor force created from this function is intended to limit the
vehicle’s rolling speed, but may not be sufficient to slow heavy vehicles on steep slopes.

[cmar143]

I can't imagine that code is preventing the cart from running...however maybe it is a glitch. There are many codes thrown that I see all the time when I connect my iqdm that are stored and normal from one thing or the other as it logs everything even if its not an issue. If you can put a different controller in just to test it I would try that. I have yet to see that error code though so can't offer any solutions

[stang331]

Sorry for the late response, I tried to post on here at work but I work on a Naval Base and their network prevents me from posting on fourms. Anyways thanks for the help, I figured thats what it was. That code wasn't keeping them from working it was just a code that i had not seen before and when I cleared the code history that one stayed on there.