lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 02-09-2016, 10:30 PM   #1
usagcr
Gone Wild
 
usagcr's Avatar
E-Z-GO
 
Join Date: May 2015
Location: Elberta Al a BAMA
Posts: 197
Default 98 EZGO series f-n-r wiring question

I hope someone can answer this without using to much brain power, I say that cuz u guys r smart. I have a 98 ezgo series 36v with a curtis 1206 controller, the controller has no A2 and no f1 or f2. It does have a 6 pin molex connector. I keep seeing 2 different diagrams for connecting the FNR switch to the controller and motor.
Both diagrams show S1 and S2 from the motor going to positions B and D on the FNR. However I am confused on where the A1 and A2 on the motor go to the FNR and Controller. does A1 go to B- or M- on controller or to position A or C on FNR ? and where does A2 go ???? Help I am so confused.
usagcr is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 02-10-2016, 08:22 AM   #2
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
Default Re: 98 EZGO series f-n-r wiring question

The 98 Ezgo Series 3 terminal control should wire like the diagram below.
Attached Images
File Type: jpg Ezgo Series solenoid activation diagram.jpg (107.9 KB, 0 views)
scottyb is offline   Reply With Quote
Old 02-10-2016, 09:15 AM   #3
kernal
Gone Wild
 
kernal's Avatar
E-Z-GO
 
Join Date: Jul 2010
Location: Peachtree City, Ga.
Posts: 2,759
Default Re: 98 EZGO series f-n-r wiring question

A2 on motor goes to "C" on FNR switch. If there is no A2 on controller then there is no wire to it or the FNR. So, just one connection on "C" on FNR
kernal is offline   Reply With Quote
Old 02-10-2016, 04:20 PM   #4
JohnnieB
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
Default Re: 98 EZGO series f-n-r wiring question

Here's the schematic with the A2 terminal and cable erased.
Attached Images
File Type: jpg Wiring Diagram - Series- No A2 -Hi-Current traced.JPG (57.9 KB, 0 views)
JohnnieB is offline   Reply With Quote
Old 02-10-2016, 08:05 PM   #5
usagcr
Gone Wild
 
usagcr's Avatar
E-Z-GO
 
Join Date: May 2015
Location: Elberta Al a BAMA
Posts: 197
Default Re: 98 EZGO series f-n-r wiring question

Ok I will have pop and brother in law, get it straight tomorrow. I will let you know what they find. Thanks a bunch for the reply🤗
usagcr is offline   Reply With Quote
Old 12-29-2016, 09:46 PM   #6
usagcr
Gone Wild
 
usagcr's Avatar
E-Z-GO
 
Join Date: May 2015
Location: Elberta Al a BAMA
Posts: 197
Default Re: 98 EZGO series f-n-r wiring question

Using diagrams we made correct connections all was good.
usagcr is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
ezgo 2003 txt series microswitch wiring Electric EZGO
EZgo Series wiring diagram Electric EZGO
Series wiring question Electric EZGO
95 ezgo series cart wiring help Electric EZGO
Series txt non dcs wiring question Electric EZGO


All times are GMT -5. The time now is 06:39 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.