|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-31-2017, 08:23 AM | #1 |
Gone Wild
Join Date: Nov 2016
Location: Wilmington NC USA
Posts: 268
|
CURTIS 1205m-5603 led light wiring
I just found a plug that I bought for my sons car stereo amplifier long time ago.
The plug is the exact one that I need to plug into my 1205m-5603 speed control program socket So is there a way to wire in a led service light to read out any errors. I seen a diagram in the manual but I'm not sure what it will accomplish? Anyone else done this before? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-01-2017, 08:24 AM | #2 |
Gone Wild
Join Date: Nov 2016
Location: Wilmington NC USA
Posts: 268
|
Re: CURTIS 1205m-5603 led light wiring
Is it even possible to put a trouble code type led on 1205m-5603 socket?
|
02-01-2017, 09:31 AM | #3 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: CURTIS 1205m-5603 led light wiring
Quote:
Here is the manual. |
|
02-01-2017, 09:45 AM | #4 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: CURTIS 1205m-5603 led light wiring
I would just add to triple-check you have identified the pin locations correctly as the J4-4 pin you need to jump has +15v and it would be a problem if you connect it to the wrong pin.
Also, according to the specifications, the maximum LED output is less than 2ma, which means You need to shop for a "Low current LED". |
02-01-2017, 10:05 AM | #5 |
Gone Wild
Join Date: Nov 2016
Location: Wilmington NC USA
Posts: 268
|
Re: CURTIS 1205m-5603 led light wiring
Thanks I was just wondering what led I could use .
Good idea on checking the outputs first. And thank you Bob for the quick response. |
02-01-2017, 11:11 AM | #6 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: CURTIS 1205m-5603 led light wiring
Here is an example of a 1ma LED (3mm):
http://www.mouser.com/ProductDetail/...HNaq1AyaIX4%3dYou can also find them in 5mm size, but the 1ma variety is hard to find in stock: http://www.newark.com/broadcom-limit...7nm/dp/39K9950 |
02-01-2017, 12:48 PM | #7 |
Gone Wild
Join Date: Nov 2016
Location: Wilmington NC USA
Posts: 268
|
Re: CURTIS 1205m-5603 led light wiring
Sergio I think I found something that will work? What do you think?
LOT OF 5 11mm SQUARE PANEL INDICATOR /PILOT LIGTH WITH CLEAR LENS AND RED LED/ 1.6V 16ma/ 6 INCHES WIRE LEADS YOU NEED TO USE A DROPPING RESISTOR TO USE WITH ANOTHER VOLTAGES THE SQUARE HOLE TO BE MOUNTED IS ABOUT 8mm by 8mm MANUFACTURED BY LUMEX AN U.S. COMPANY// REVIEW PICTURES AND THANKS FOR LOOKING I can get 5 for 7.50 to my door. Will this work as Is? Thanks Shawn, Seaquell |
02-01-2017, 01:34 PM | #8 |
Gone Wild
Join Date: Nov 2016
Location: Wilmington NC USA
Posts: 268
|
Re: CURTIS 1205m-5603 led light wiring
Just reread the 2mA max you posted , thanks
I will probably just order from the link you posted sergio. |
02-01-2017, 01:43 PM | #9 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: CURTIS 1205m-5603 led light wiring
Maybe BobBoyce knows the answer, but if the LED output pin (J4-3) is 15v, You will also need a 10kΩ x 1/4watt resistor in series with the LED to limit the current.
|
02-01-2017, 04:56 PM | #10 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: CURTIS 1205m-5603 led light wiring
Quote:
Bob |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Will a Curtis 1205M-5603 controller work? | Electric Club Car | |||
Swapping Curtis Controller 1204 to 1205M | Electric Club Car | |||
Help with Curtis controller model 1205M-5601 | Electric golf carts | |||
Troubleshooting Curtis 1205M controller | Electric EZGO | |||
Curtis 1205M on a 98 model ezgo | Extreme DC! |