|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-05-2018, 10:34 AM | #1 |
Not Yet Wild
Join Date: May 2018
Posts: 8
|
Solenoid not clicking but meter says its good
I have an ezgo 36 volt. System is 2009. It was great for 10 minutes into ride and then it quit. Towed it back. Check batteries and connections and all is well. Solenoid doesn’t click when pedal is engaged. According to test you’re suppose to do on solenoid it’s not the problem. Any ideas on where to start from there
Thx Jeremy G |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-05-2018, 11:14 AM | #2 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,235
|
Re: Solenoid not clicking but meter says its good
Is this a PDS or Series cart?
|
05-05-2018, 11:45 AM | #3 |
Not Yet Wild
Join Date: May 2018
Posts: 8
|
Re: Solenoid not clicking but meter says its good
Yes it is PDS
|
05-05-2018, 12:15 PM | #4 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,235
|
Re: Solenoid not clicking but meter says its good
On the cover that protects the controller there is a label telling you how to put it in diagnostic mode. Do that and listen for the beeps code to see what is wrong.
|
05-05-2018, 01:42 PM | #5 |
Not Yet Wild
Join Date: May 2018
Posts: 8
|
Re: Solenoid not clicking but meter says its good
Thank u. Will check when I get back home
|
05-06-2018, 06:38 AM | #6 |
Not Yet Wild
Join Date: May 2018
Posts: 8
|
Re: Solenoid not clicking but meter says its good
The beeper was disabled by previous owner. Going to try to locate where it was disabled at so I can get the diagnostic mode to do its thing. Will keep you posted Thx
|
05-06-2018, 08:00 AM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Solenoid not clicking but meter says its good
PDS buzzer is behind the key switch plate... easiest disable is to unplug a wire there, that's where I'd look first.
|
05-06-2018, 01:44 PM | #8 |
Not Yet Wild
Join Date: May 2018
Posts: 8
|
Re: Solenoid not clicking but meter says its good
Hey guys thank you again for your help. I have got the system for diagnostic going. Low voltage code. I traced it to a fuse link at + post on battery. Should I be concerned about something more. It’s working. About to go track down fuse link before I go riding
|
05-06-2018, 02:41 PM | #9 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,235
|
Re: Solenoid not clicking but meter says its good
What is your pack voltage when getting the low voltage fault?
|
05-06-2018, 03:14 PM | #10 |
Not Yet Wild
Join Date: May 2018
Posts: 8
|
Re: Solenoid not clicking but meter says its good
So got everything going and new fuse link and it has blown again. Any help on where to start now
|
|
|
Similar Threads | ||||
Thread | Forum | |||
99 TXT DCS solenoid not clicking | Electric EZGO | |||
Solenoid clicking | Electric Club Car | |||
No clicking from the solenoid | Electric Club Car | |||
Clicking Solenoid | Electric EZGO | |||
solenoid clicking | Electric Club Car |