|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-07-2018, 07:40 PM | #1 |
Not Yet Wild
Join Date: Aug 2018
Posts: 5
|
96 36v txt need help wiring
I bought a total upgrade kit. I followed their instructions and now I'm getting to the part of the solenoid. I took a picture of it before I took it apart. but I guess I didn't do a very good job of keeping track of the wires. I know to combined the two red wires and 2 black wires together to put on the tabs. my question is on the new switch I don't have a ground so can I ground it to the frame? second where does the 2 red wires that you combined on the solenoid come from? I seem to not find them. I also had to cut the plug off and wire it into the controller. that is the only red wire I can seem to find. please help.. thanks for you time
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-07-2018, 07:47 PM | #2 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: 96 36v txt need help wiring
Don’t ground to the frame. All grounding on an electric cart should go to the B-. Don’t talk about “BU” on this forum... [emoji52]
Club Car DS driver’s club #59 |
08-07-2018, 07:55 PM | #3 |
Not Yet Wild
Join Date: Aug 2018
Posts: 5
|
Re: 96 36v txt need help wiring
i changed it. sorry it does come from the b- anyway but there is a ground that was plugged into the switch that the new controller doesn't have. its a high amp switch..
|
08-07-2018, 07:57 PM | #4 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
96 36v txt need help wiring
I was actually joking. Many people, including myself, have had bad experiences with them.
Club Car DS driver’s club #59 |
08-07-2018, 07:58 PM | #5 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: 96 36v txt need help wiring
Is this an Alltrax Controller you are installing?
Club Car DS driver’s club #59 |
08-07-2018, 08:01 PM | #6 |
Gone Wild
Join Date: Mar 2017
Location: Miami
Posts: 157
|
Re: 96 36v txt need help wiring
1st. I don’t think carts have a negative frame like cars do. You have to wire a negative to the accessories.
2nd. You need to make two cable. Like the instructions say, 8-10 inches long with a ring on one side and a spade end on the other. The harness cables you cut had a short red wire that went from the connector to the solenoid. That is the wire you are making. The other wire you make is the same length that went from the negative post on the controller to the solenoid. Alltrax have a negative post in group of posts so you don’t have to wire it to the main negative post anymore These are ScottyBs install that I followed. http://www.buggiesgonewild.com/elect...r-install.html |
08-07-2018, 08:02 PM | #7 |
Not Yet Wild
Join Date: Aug 2018
Posts: 5
|
Re: 96 36v txt need help wiring
this is what i bought
AMD Speed 6HP Series Motor Curtis 500a High Amperage Controller (ITS input) High Amperage F/R switch, Solenoid with bracket & diode |
08-07-2018, 08:03 PM | #8 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: 96 36v txt need help wiring
I’m out if it’s a Curtis... sorry.[emoji53]
Club Car DS driver’s club #59 |
08-07-2018, 10:58 PM | #9 |
Getting Wild
Join Date: Jul 2018
Location: Louisiana
Posts: 86
|
Re: 96 36v txt need help wiring
Hey Measter, did you get this sorted? I’m not an expert, but I just rebuilt a ‘95 medalist this week. Fairly familiar with the wiring, but I don’t quite follow exactly what wires are in question. I have the wiring diagrams on my computer and will check them n the morning if you can clarify.
|
08-08-2018, 02:19 PM | #10 |
Not Yet Wild
Join Date: Aug 2018
Posts: 5
|
Re: 96 36v txt need help wiring
Off of the positive side the two red wires I need to know where they go so I can run new ones or merge them.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Quick 2ga wiring question. What all needs re-wiring? | Electric Club Car | |||
Controller wiring/DCS fnr switch wiring | Electric EZGO | |||
Wiring ? | Electric EZGO | |||
Wiring lights and a winch? Use a converter or hard wiring? | Electric EZGO | |||
Wiring lights and a winch? Use a converter or hard wiring? | Electric EZGO |