|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-18-2019, 08:08 PM | #1 |
Not Yet Wild
Join Date: Jun 2019
Location: Maui
Posts: 41
|
08 rxv danaher to Curtis conversion
Got a new Curtis controller it go’s in to check good but no pedal response if bob u can help me out on dis did the wiring pin out that u did on 08 rxv please lmk Mahalo
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-19-2019, 03:54 AM | #2 |
Not Yet Wild
Join Date: Jun 2019
Location: Maui
Posts: 41
|
Re: 08 rxv danaher to Curtis conversion
Or if anybody can help please
|
08-19-2019, 03:58 AM | #3 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: 08 rxv danaher to Curtis conversion
First thing I would do is put that controller in another perfectly good running cart and see if it does the same on that cart. This was a rebuilt controller you bought right? Could be just a bad controller.
|
08-19-2019, 10:18 AM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 08 rxv danaher to Curtis conversion
Also, starting a new thread every couple of days on the same topic is counter-productive.
|
08-19-2019, 12:45 PM | #5 |
Not Yet Wild
Join Date: Jun 2019
Location: Maui
Posts: 41
|
Re: 08 rxv danaher to Curtis conversion
Came off of a perfect running cart 2016 Guy upgraded his controller
|
08-19-2019, 01:08 PM | #6 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: 08 rxv danaher to Curtis conversion
You using a 48v solenoid?
|
08-19-2019, 01:30 PM | #7 |
Not Yet Wild
Join Date: Jun 2019
Location: Maui
Posts: 41
|
Re: 08 rxv danaher to Curtis conversion
Yes it’s going in to Check but no throttle response
|
08-19-2019, 01:58 PM | #8 |
Not Yet Wild
Join Date: Jun 2019
Location: Maui
Posts: 41
|
Re: 08 rxv danaher to Curtis conversion
I have 48 going in to the switch but nothing coming out light blue wire back to the controller
|
08-20-2019, 06:10 AM | #9 |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: 08 rxv danaher to Curtis conversion
Make sure that you have 48V present on the harness blue wire connected to the charge port when the charger is unplugged. That is the charger interlock... The throttle will not operate if it is inhibited by a bad charger port PCB.
|
08-20-2019, 02:40 PM | #10 |
Not Yet Wild
Join Date: Jun 2019
Location: Maui
Posts: 41
|
Re: 08 rxv danaher to Curtis conversion
Sorry bob I thought I was running a 48v solenoid but it was a 36 v so I’m going to get one today n try it out
|
|
|
Similar Threads | ||||
Thread | Forum | |||
RXV Danaher to Curtis Conversion Documented | Electric EZGO | |||
RXV Danaher to Curtis Conversion Instructions | Electric EZGO | |||
danaher -> curtis conversion kit strange behaviour | Electric EZGO | |||
RXV Danaher to Curtis Conversion | Electric EZGO | |||
RXV Danaher to Curtis Conversion Documented | Electric EZGO |