|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-25-2020, 05:14 PM | #1 |
Not Yet Wild
Join Date: Mar 2020
Posts: 7
|
looking to send a curtis Controller to Bob Boyce!
Hey all! Im new here, but have been a lurker for a long time. was about to pull the trigger on a Navitas 600amp controller for my cart for speed. then started doing a little more reading here and found about the work Bob Boyce does. I have a second controller that i aquired from a wrecked 2014 RXV i bought from friend. i installed it in my cart to confirm it works.. and it does. I would like to get in the area of 38-40MPH, since all my buddies with txts are running around there.
I also would like group input on braking, as i know the motor it self does the braking, do i need to go into front disc brakes with a controller upgrade? Thanks all. this is my first post, but I have been wanting to join for a while... never had an email address outside of google or hotmail for years! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-25-2020, 06:55 PM | #2 |
Not Yet Wild
Join Date: Mar 2020
Posts: 39
|
Re: looking to send a curtis Controller to Bob Boyce!
I just got my Bob programmed controller installed in mine and got 36mph with 6” lift and 23x10x14 tires. I noticed a huge increase in torque also. Good luck! Send it to Bob and don’t look back. You will be impressed in sure!
|
03-25-2020, 07:36 PM | #3 | |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: looking to send a curtis Controller to Bob Boyce!
Quote:
Tell us more about your cart. Lifted or not, tire size, terrain, or a backseat. |
|
03-25-2020, 09:04 PM | #4 | |
Not Yet Wild
Join Date: Mar 2020
Posts: 7
|
Re: looking to send a curtis Controller to Bob Boyce!
Quote:
It currently has freedom mode set on the controller in the cart. Its nice but I'm getting gassed by buddies in souped up txts. The terrain I ride is strictly streets and allies. I went with more AT tires over mud grips on tires. Smoother ride but has the look. Not alot of hills in my area of south Georgia! |
|
03-25-2020, 09:11 PM | #5 |
Not Yet Wild
Join Date: Mar 2020
Posts: 7
|
Re: looking to send a curtis Controller to Bob Boyce!
usgicollector, you tune controllers as well correct?
|
03-25-2020, 09:20 PM | #6 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,174
|
Re: looking to send a curtis Controller to Bob Boyce!
Unless it has the 350 Curtis I don’t think Bob will touch it with that size tire.
|
03-25-2020, 09:41 PM | #7 |
Not Yet Wild
Join Date: Mar 2020
Posts: 7
|
Re: looking to send a curtis Controller to Bob Boyce!
|
03-25-2020, 10:24 PM | #8 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,174
|
Re: looking to send a curtis Controller to Bob Boyce!
He does modify the 235 amp controller but only up to 20.5” tires.
|
03-26-2020, 04:12 AM | #9 |
Not Yet Wild
Join Date: Mar 2020
Posts: 7
|
Re: looking to send a curtis Controller to Bob Boyce!
|
03-26-2020, 04:39 AM | #10 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: looking to send a curtis Controller to Bob Boyce!
Dan I sent you a pm.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
I need bob boyce to program my controller. | Electric EZGO | |||
Bob Boyce programmed my 2016 rxv fleet curtis controller | Electric EZGO | |||
Is the Curtis 1311-1101 Controller Handset PMC a good controller | Electric EZGO | |||
Good place to send out a DCS controller to be rebuilt? | Electric EZGO |