|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
05-20-2020, 04:14 PM | #1 |
Gone Wild
Join Date: Aug 2018
Posts: 163
|
Alltrax xct 300 install..... now cart won’t move?
Installed a XCT 300 on my 2003 DS IQ after the stock unit kicked the bucket. Cart will not move. I turn the key, place switch to forward and depress pedal and nothing. The solenoid does not click. The LED light on the controller illuminates solid green. Nothing. I have 51 volts at the pack, 51 to the Solenoid (both sides) and I get that same voltage on both small terminals of the solenoid too. I even traced 51 volts to the motor? Shouldn’t the solenoid only transfer current when open and not constantly? I’me confuses here?
HELP! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-20-2020, 05:11 PM | #2 |
Gone Wild
Join Date: Aug 2018
Posts: 163
|
Re: Alltrax xct 300 install..... now cart won’t move?
Problem solved!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax XCT 300 Install | Electric Club Car | |||
Alltrax 500 install | Electric EZGO | |||
Cart Won't Move Alltrax Shutdown and Low Throttle Input Underange | Electric Club Car | |||
Alltrax install makes cart go SLOW | Electric Yamaha | |||
Alltrax XTC install IQ | Electric Club Car |