RXV no power

Ohhhmygato · 08-04-2020, 07:36 PM

Quote:

Originally Posted by cgtech

Danahers are hard to work on without a handheld scanner. For example, some "failed part" errors will prevent powerup entirely, and unplugging the failed part results in the same error in the controller. So unplugging the failed part wont make any change the person working on the cart would notice.

My brother has a curtis sw180b 1125 solenoid. Would that work? He has an extra from his navitas AC swap.

https://www.amazon.com/Solenoid-Curt.../dp/B081DLJ5KY

https://buggiesgonewild.com/attachme...1&d=1596587779

cgtech · 08-04-2020, 10:41 PM

No, your 48v rxv actually uses a 36v solenoid. The solenoid is powered by the controller. And unlike the Curtis RXVs, you cant go into the danaher parameters & change it for use with a 48v solenoid.

Ohhhmygato · 08-06-2020, 07:55 PM

Quote:

Originally Posted by cgtech

No, your 48v rxv actually uses a 36v solenoid. The solenoid is powered by the controller. And unlike the Curtis RXVs, you cant go into the danaher parameters & change it for use with a 48v solenoid.

Put the new solenoid on and it fired right up! Thanks for the help!

cgtech · 08-06-2020, 11:17 PM

If you are using the 48v solenoid, you are drawing 33% more power than the factory intended to activate the solenoid, so start saving money for a controller.

08-04-2020, 10:41 PM	#22
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: RXV no power No, your 48v rxv actually uses a 36v solenoid. The solenoid is powered by the controller. And unlike the Curtis RXVs, you cant go into the danaher parameters & change it for use with a 48v solenoid.

08-06-2020, 11:17 PM	#24
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: RXV no power If you are using the 48v solenoid, you are drawing 33% more power than the factory intended to activate the solenoid, so start saving money for a controller.

Similar Threads
Thread	Forum
1995 ezgo medalist power, new batteries, no power to the solenoid	Electric EZGO
G1 not starting...no power power coming from magneto?	Gas Yamaha
Full power in reverse, part power in forward	Electric EZGO
2005 Precedent starts of powered, then loses power, reverse always power	Electric Club Car
Power Wise Charger worked after board replaced now back to no power	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum