|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-14-2020, 03:48 PM | #1 |
Not Yet Wild
Join Date: Aug 2017
Posts: 46
|
Reversing contactor
Ok, so I didn’t even know this was an option until yesterday to change the mechanical FNR to the contactor.
I have an ezgo series cart with an altraxx sr 48600 Trying to get a feel for the wiring I get the main cables but I have the blue coming from the Key switch to the old fnr And a blue coming from the controller to the fnr ( I’m guessing 1/2 speed reverse?) Ground from solenoid to fnr And of course power to fnr My questions are mainly for the blue wires how do they hook up to the new contactor? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-14-2020, 10:59 PM | #2 |
Gone Wild
Join Date: Sep 2016
Location: Northern California
Posts: 1,300
|
Re: Reversing contactor
Did you get this from scottyb? His diagram is really good.
I’m not sure if I’m totally following you, but the activation circuit will start at pack+, go through the ksi, then to the pedal micro switch. Hope that helps some. |
10-15-2020, 03:08 PM | #3 | |
Not Yet Wild
Join Date: Jul 2019
Posts: 48
|
Re: Reversing contactor
Quote:
|
|
10-15-2020, 04:00 PM | #4 |
Not Yet Wild
Join Date: Aug 2017
Posts: 46
|
Re: Reversing contactor
Thanks for the reply’s.
I unfortunately did not know about this part until I went to my local shop to get the HD FNR. They told me about the upgrade with the contactor. I purchased it from them with the install instructions and the “kit”. Got everything hooked up as far as I can tell correct but only had forward and no reverse. The solenoid and controller would kick on as it should power going to reversing contactor but no power to the motor in reverse. Only way to get reverse is to swap the motor cables around. Before purchasing another part I’ll research it a little better |
10-15-2020, 07:32 PM | #5 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Reversing contactor
That is likely just a wiring mismatch, the motor generally knows no difference between F and R.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
reversing contactor? | Electric EZGO | |||
Reversing contactor help | Electric EZGO | |||
reversing contactor | Electric EZGO | |||
Reversing Contactor not working? EZGO TXT 48V w/SW202 Contactor. How to test it? | Electric EZGO | |||
reversing a series motor without a reversing contactor? | Electric EZGO |