500 Amp Controller install. In over my head!

[Hat Trick]

Thanks for all your help Scotty!

[ChevyRacing75]

Originally Posted by Hat Trick

Thanks for all your help Scotty!

he's the man

[LostHusker]

Originally Posted by scottyb

There is no way I would sell a motor and controller upgrade to use with the stock solenoid? I guess we need the specs on the stock solenoid? T-dawg would know....anybody? I know Ezgo stock unit is 100a.

I am not completely sure of the 48V solenoid, but I had purchased a similar setup from D&D, they sold me the sw80, but ended up getting another solenoid because it was the wrong one, it would not handle the controller, and this was on 36V. I went to the MZJ200. This information was provided to me from Chuck at Alltrax.

[Hat Trick]

Originally Posted by LostHusker

I am not completely sure of the 48V solenoid, but I had purchased a similar setup from D&D, they sold me the sw80, but ended up getting another solenoid because it was the wrong one, it would not handle the controller, and this was on 36V. I went to the MZJ200. This information was provided to me from Chuck at Alltrax.

K, thanks. I'll see what happens.

[scottyb]

The solenoid we are talking about is 48 volts. .... not sure it is the same one you had for 36v?

[Hat Trick]

Apparently I was mistaken. Maybe I could get away with the stock solenoid, but it does say (recommended anyway) now that I looked closer (I looked over it and thought I only needed to upgrade the F/R switch to HD) to upgrade the solenoid to a HD 48v solenoid so I have one coming to my door tomorrow. I'm going to be working on this thing every waking minute trying to get it done by Monday.

[scottyb]

post results here!

[scottyb]

Ooops!