|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-02-2010, 08:39 PM | #1 |
Not Yet Wild
Join Date: Oct 2009
Posts: 21
|
HD F&R Switch???
I have a 1997 EZGO TXT DCS cart. I have upgraded to an alltrax 400A controller and am trying to order parts to upgrade to 48V now. I am currently looking for a F&R switch but most I see say they are for nonDCS carts. Am I reading this wrong or can anyone point me in the right direction for which switch I need? I have done most of my parts research on Buggiesunlimited.com
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-02-2010, 10:30 PM | #2 |
Not Yet Wild
Join Date: Sep 2010
Location: Glendale, Ca
Posts: 5
|
Re: HD F&R Switch???
I, too, have a similar question. I have 99 DCS and just upgraded controller to Alltrax DCX 400. Alltrax placed a warning label stating solenoid, diode, resistor and HD F&R switch. I've changed everything except HD F&R switch.
I have replaced the small microswitches (on the cam) with new ones. Is this sufficient so I don't blow the controller? any help is greatly appreciated |
10-02-2010, 10:45 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: HD F&R Switch???
The HD F&R switches are for the Series carts only. The DCS and PDS do use a HD F&R, their directional switching is done in the controller.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
forward/reverse switch change to toggle switch | Electric Club Car | |||
Key switch & Kill switch question | Gas Club Car | |||
Forward Reverse switch limit switch | Electric Club Car | |||
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha | |||
Micro switch on fwd and rev switch has bee removed | Electric EZGO |