lights on a 48 volt CC

[Chrisspy]

Can somebody give me some info on how to wire up lights on 48 volt CC? I have everything in there including the voltage reducer, there are 2 wires coming out of one side of the reducer and one coming out of the other side, I bekieve that one goes to the negative side of the battery pack. Then I have a white wire and red wire with a inline fuse going to the switch. I need to know which wire from the reducer goes the battery and which wire gets hooked up the switch

[GLEEMO]

look at this http://www.buggiesgonewild.com/attac...r-inverter.jpg

Are U sure it only has 3 wires , NOT 4 ?

Did U not get a wiring Diag .
Do U have a link to the sellers page.

[Chrisspy]

I just got a diagram from the co I got it from, and I did have it right, thanks for the reply though!

[golfcarfixer]

The one single wire goes to the main neg. battery cable and the other is for your light after the switch.You should have a wire with a fuse that goes to the pos. sideof the 16 volts on your battery.Then you should have 2 black wires coming out also and they get hooked up to the other side of the reducer.I usually cut the ends off and twist them together and hook them up so you dont have a lot of excess wire.