|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-02-2011, 07:01 PM | #11 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: Motor rattling noise
BTW thanks much for helping with that situation ( tornados ) although it didn,t effect me you still deserve an atta boy and a bravo for helping those people out..................................
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-17-2011, 12:41 PM | #12 |
Not Yet Wild
Join Date: Jul 2011
Location: Panama City fl
Posts: 8
|
Re: Motor rattling noise
how do you get the old ring out of the shaft I removed the snap ring but the spline part inside is not moving and the splines are wore down on the end
|
07-17-2011, 06:06 PM | #13 | |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,900
|
Re: Motor rattling noise
Quote:
I picked out the pieces, scraped out the splines, and put the new one in. But from what I understand they should just "pry" out with a screwdriver. |
|
12-08-2011, 05:14 PM | #14 |
Not Yet Wild
Join Date: Jan 2009
Posts: 34
|
Re: Motor rattling noise
Back to my original problem... My life has been crazy and the 05 CC was just not a priority so I didn't worry about the noise. Way back on my last post I greased up the bearing on the end and put the motor back together. That didnt help, So now that Im able to work on this progect, I've pulled the motor back apart and when I have the rear bearing in the end plate (with the retainer ring bolted in place) you can wiggle the end plate on the bearing...Is this normal? Do I need to tighten the retainer plate more (the screws are small) The end plate doesn't look like the bearing has been spinning in the end plate cup. And the bearing itself doesn't have any wiggle, spins freely and feels great. And to top it all off, this cart will be for sale as soon as this issue is solved...thus trying to keep cost down.
|
12-17-2011, 05:27 PM | #15 |
Not Yet Wild
Join Date: Jan 2009
Posts: 34
|
Re: Motor rattling noise
OK, here is what I found was the rattling noise problem.. It wasn't the bearing, but it is a warped stator. I was able to talk to some folks that rebuild motors and after chatting with them on the sound of the noise, when I could hear the noise and the wear patterns in the magnets, they believe the stator is warped. They said it was rare and not really worth trying to repair. I have found a used motor and I will continue getting this cart ready to sell. Hope this helps add to the knowledge base of the group.
|
12-17-2011, 05:35 PM | #16 | |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: Motor rattling noise
Quote:
|
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
1999 48V club Car rattling noise | Electric Club Car | |||
G1 Deceleration Marble Rattling Noise - Ideas? | Gas Yamaha | |||
IQ motor noise | Electric Club Car | |||
Motor noise | Electric Club Car | |||
Rattling noise | Gas EZGO |