lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 12-28-2011, 06:55 PM   #1
cheapjeep2
Gone Wild
 
cheapjeep2's Avatar
Club Car
 
Join Date: Nov 2008
Location: Peachtree City, Georgia
Posts: 1,546
Default Delta-Q QuiQ & Trojan T-875 setup procedure

I had a similar thread started on this topic but decided to start a new one with a new title to make it easier to search.

Instructions for using the Delta-Q QuiQ 912-4800 48v charger on Trojan T-875 batteries.


Troy,

For the Trojan T-875 flooded battery, use algorithm #1 if using the temperature sensor and algorithm #3 if you do not have the temperature sensor. The temperature sensor looks like this: (see image at bottom of thread).

Description: Description: Description: Description: QuiQ Output Cable 006

Here’s the instructions on how to check and change algorithtms:

Check Default Charge Algorithm

Enter Algorithm Display Mode:

1) Disconnect AC Power.

2) Remove positive lead from battery pack.

3) Apply AC power and the charger will display the algorithm number after the Power On Self Test:

a. All algorithms will display as a series of flashes of the ‘80%’ LED.

b. Algorithms #1 - 6 will also be indicated by the Ammeter LEDs (see User’s Guide).

Examples:

*** = Algorithm # 3

** <Short Pause> * = Algorithm #21

4) Algorithm number display repeats for 11 seconds, then Algorithm Display Mode ends.

5) Remove AC Power and reconnect positive lead.


Change Default Charge Algorithm

1) Enter Algorithm Display Mode (as above).

2) While Algorithm Number is displayed (for 11 seconds), touch positive lead to the battery pack positive terminal for 3.0 seconds (+/- 0.5s).

3) Remove lead from battery pack. Algorithm Number will increment.

4) To increment the Algorithm Number again, repeat Steps 2 and 3 within 30 seconds.

5) Touch positive lead to positive terminal and hold until relay clicks (>10 seconds). The new default algorithm is now stored.

6) Remove AC Power and check default algorithm (as above)

Contact your original equipment manufacturer if your battery pack is not supported by the charge algorithms loaded in your charger.


Best regards,

support@delta-q.com
Attached Images
File Type: jpg sensor.jpg (6.6 KB, 2 views)
cheapjeep2 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 12-29-2011, 06:45 AM   #2
Stevegrmich
Medicare Recipient
E-Z-GO
 
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
Default Re: Delta-Q QuiQ & Trojan T-875 setup procedure

Stickie?? . . .
Stevegrmich is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Programming a Delta-Q QuiQ 912-4800 charger? Electric Club Car
Delta QuiQ charger Golf Carts and Parts
Delta QuiQ 48 on 42v question Electric EZGO
48V Motor Testing Procedure? Electric Club Car


All times are GMT -5. The time now is 03:38 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.