|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-09-2012, 08:39 PM | #1 |
Gone Wild
Join Date: Dec 2010
Location: West Texas
Posts: 182
|
Stock 01 PDS motor replacement
Have a 01 PDS with bad motor. The motor that was in the cart has A & F terminals. The new motor from red hawk has A & S terminals and is supposed to work with stock controller but with cable upgrade. Cart uses 1206-mx controller. Motor speed sensor on new motor has 3 lager wires without a plug stubbed out and has a bolt on sensor. The motor I took out has the smaller wire speed sensor wire with plug that goes to controller. Motor is supposed to fit DCS/PDS.
Wondering if the motor sent is correct to use in place of factory motor. Never changed a motor where the letters on the terminals are different Both are sepex motors. Thanks in advance for your help |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-09-2012, 08:42 PM | #2 |
Gone Wild
Join Date: Dec 2010
Location: West Texas
Posts: 182
|
Re: Stock 01 PDS motor replacement
Motor that was in cart is a
Part # DE8-4001 or 73124G08 36v |
03-09-2012, 09:21 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Stock 01 PDS motor replacement
It sounds like they sent you a DCS motor. DCS carts didn't have regen braking.
|
03-10-2012, 07:40 AM | #4 |
Gone Wild
Join Date: Dec 2010
Location: West Texas
Posts: 182
|
Re: Stock 01 PDS motor replacement
I agree Scotty. In their catalog is has DCS/PDS motor. I'm confused on the labeling on the motor. It may work just fine but I need to make sure first.
Hopefully someone will drop in and has seen this before. Thanks |
03-10-2012, 10:00 AM | #5 |
Gone Wild
Join Date: Sep 2010
Location: Erie, Pennsylvania
Posts: 989
|
Re: Stock 01 PDS motor replacement
Maybe let Red Hawk sort it out !! - RAY
|
03-10-2012, 11:13 AM | #6 |
Gone Wild
Join Date: Dec 2010
Location: West Texas
Posts: 182
|
Re: Stock 01 PDS motor replacement
I plan on calling them Monday but wanted to see if we could get it going before then.
Thanks |
03-10-2012, 11:28 AM | #7 |
Gone Wild
Join Date: Sep 2010
Location: Erie, Pennsylvania
Posts: 989
|
Re: Stock 01 PDS motor replacement
Good idea. That way they can't blow smoke at ya. Sorry I can't be of any help. - RAY
|
03-10-2012, 11:51 AM | #8 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Stock 01 PDS motor replacement
I don't think it matters too much if the stationary windings are labeled Stator or Field since they both mean the same thing, but I would take issue with the wires from the speed sensor not having a plug on it. What do they expect the consumer to do, cut the plug off the old motor and butt-splice it? At a minimum, I'd expect a plug housing and pins to come with it.
DCS didn't use a speed sensor and PDS does, so it is for a PDS. Just my $0.02 |
03-21-2012, 08:21 AM | #9 |
Gone Wild
Join Date: Dec 2010
Location: West Texas
Posts: 182
|
Re: Stock 01 PDS motor replacement
Just an update on this so you will know. The motor from Red Hawk works fine on the cart with the stock controller. All you have to do is splice the pig tail wires coming out of the motor and it is all over!!
Thanks for the help and hope this helps others |
|
|
Similar Threads | ||||
Thread | Forum | |||
G2 motor replacement | Gas Yamaha | |||
Pendicular Motor Replacement | Electric EZGO | |||
Replacement Motor | Gas Club Car | |||
Replacement Shocks for Stock 1988 ezgo gas | Gas EZGO |