key switch plate

scottclose · 03-20-2012, 12:45 PM

Are the two plastic push in rivets that hold the key switch plate in place reusable, or do you need new ones on hand? I wanted to install a toggle switch on this plate and dint know if they are reusable or not. Thanks

Gonkulor · 03-20-2012, 02:33 PM

Yes they are reusable, just be sure to keep the center because it's not uncommon to be pushing the center back out thru the bottom of the rivet and a whirlwind of force and motivation will creep up and shoot that little bugger across the room.

03-20-2012, 12:45 PM	#1
scottclose Not Yet Wild Join Date: Aug 2011 Posts: 4	key switch plate Are the two plastic push in rivets that hold the key switch plate in place reusable, or do you need new ones on hand? I wanted to install a toggle switch on this plate and dint know if they are reusable or not. Thanks
scottclose Not Yet Wild Join Date: Aug 2011 Posts: 4

03-20-2012, 02:33 PM	#2
Gonkulor Astronautilator Join Date: Sep 2011 Location: North Idaho Posts: 1,494	Re: key switch plate Yes they are reusable, just be sure to keep the center because it's not uncommon to be pushing the center back out thru the bottom of the rivet and a whirlwind of force and motivation will creep up and shoot that little bugger across the room.

Similar Threads
Thread	Forum
Key Switch Plate	Electric EZGO
PDS Switch Plate with LED Meter	Electric EZGO
WTB Reversing switch base plate	Gas Harley Davidson
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP!	Gas Yamaha
Newbie:How can I identify my EZGO? No id plate plate present. Please help.	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum