Wiring Ok I want to do it right so here I am...

[Zenzilla]

Originally Posted by ddeblance

Sure looks good! Now can't wait to get mine on...

Thanks it was definitely worth installing can't wait to camp now cause its super dark at the campground

[Zenzilla]

Wired battery and fuse box. Still need to clean up wiring though.

[Zenzilla]

Wired 250 watt bazooka tube.

[Zenzilla]

Another pic

[Zenzilla]

Speakers wired and installed

[Zenzilla]

Another

[texasbagger]

Originally Posted by scottyb

I'm going to post a generic example of a typical DC reducer installation.
It is not doing to match your reducer or your cart. But there are many similarities between the many makes of DC reducers and the many makes of golf carts so we are going to use this diagram as an example only. It will help to get the wheels turning and the specific questions rolling.

Questions for you.
Are you aware that every 12v accessory needs to have 2 wires going to it because there is no frame grounding in golf carts?
Does your reducer have an on/off circuit? If not you will have to make one up.
Do you have a fuse block and a ground block?

Best of luck

If the converter has the yellow "Switch Unit on and Off" then do you need a relay or can you run straight to the key switch as the directions say? Does this yellow wire just work as a completion of the circuit to "power on" the converter?