|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-27-2014, 01:38 PM
|
#1 |
|
Gone Wild
Join Date: Sep 2008
Location: Eastern NC
Posts: 432
|
1996 ezgo dcs resistor question?
Trying to figure out how to test solenoid resistor assembly # 28336g01,
And which way does go on solenoid post,one end has white markings... 96 ezgo dcs |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-27-2014, 01:48 PM
|
#2 |
|
Gone Wild
Join Date: Sep 2008
Location: Eastern NC
Posts: 432
|
Re: 1996 ezgo dcs resistor question?
Original problem is batteries discharge totally down to 0 when parked for a couple weeks...key off
|
|
|
|
|
05-27-2014, 02:19 PM
|
#3 |
|
......................
 Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 1996 ezgo dcs resistor question?
Not sure what your trying to test?, , the band on the diode goes to the POS + post the small post on the solenoid. The pic you posted is not for the solenoid, that is for the post coming out of the top of the controller
 |
|
|
|
|
05-27-2014, 02:37 PM
|
#4 |
|
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 1996 ezgo dcs resistor question?
This is what's in you pic
 The Pre-Charged Resistor Assembly is an OEM replacement component required in the golf cart's electrical system for the speed controller. This assembly should only be installed on E-Z-GO Electric TXT and Medalist golf carts with the Drive Control System. E-Z-GO 73150G01 Pre Charged Resistor Assembly Speed Controller by E-Z-GO  |
|
|
|
|
05-27-2014, 04:00 PM
|
#5 |
|
Gone Wild
Join Date: Sep 2008
Location: Eastern NC
Posts: 432
|
Re: 1996 ezgo dcs resistor question?
How do you test,to check if it's o/ k ?
Which side goes to the battery side of the solenoid? |
|
|
|
|
06-01-2014, 06:34 PM
|
#6 |
|
Gone Wild
Join Date: Sep 2008
Location: Eastern NC
Posts: 432
|
Re: 1996 ezgo dcs resistor question?
Well,no reply about which end where?Received another cart to work on,and saw that white end goes on battery side of solenoid...Still need info about how to test?Any help will be appreciated,,,,Thank U
|
|
|
|
|
06-01-2014, 07:45 PM
|
#7 | ||
|
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 1996 ezgo dcs resistor question?
Quote:
Quote:
how to test a diode http://www.learnabout-electronics.org/diodes_05.php \ how to test a resistor |
||
|
|
|
|
06-01-2014, 08:22 PM
|
#8 | |
|
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 1996 ezgo dcs resistor question?
Quote:
|
|
|
|
|
|
10-16-2020, 07:24 PM
|
#9 | |
|
Not Yet Wild
Join Date: Oct 2020
Posts: 42
|
Re: 1996 ezgo dcs resistor question?
Quote:
|
|
|
|
|
|
10-17-2020, 10:26 AM
|
#10 | |
|
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 1996 ezgo dcs resistor question?
Quote:
The banded end of the diodes connect to the solenoid's battery side large terminal. |
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 1986 EZGO Marathon Resistor Coil Question | Electric EZGO | |||
| 83 ezgo resistor question? | Electric EZGO | |||
| 1988 EZGO 36v Marathon resistor - wiring question | Electric EZGO | |||
| Question regarding options for a 1996 DCS EZGO Cart | Electric EZGO | |||
| 1996 ezgo dcs new guy with a glong question | Electric EZGO | |||
Linear Mode
