|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
09-28-2014, 03:15 PM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2014
Posts: 3
|
Headlights/Taillights not working after installing new lights and wiring
I have a 1999 EZ go electric golf cart, and when I bought it the headlights and taillights were not working. I installed all new lights and new wiring, a new switch and fuse. Still, not a single light works. I used the wiring diagram to hook up to two batteries. Any suggestions on how to trouble shoot this? I have checked a dozen times to make sure everything is hooked up properly.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-28-2014, 03:43 PM
|
#2 |
|
Guest
Posts: n/a
|
Re: Headlights/Taillights not working after installing new lights and wiring
check switch ... had a (new) bad one once
take 12v + and connect to lights lead volts of cart ? |
|
|
|
09-28-2014, 04:27 PM
|
#3 |
|
Not Yet Wild
Join Date: Sep 2014
Posts: 3
|
Re: Headlights/Taillights not working after installing new lights and wiring
Just tried this, but every time I do it the fuse blows?
|
|
|
|
|
09-28-2014, 04:29 PM
|
#4 |
|
Not Yet Wild
Join Date: Sep 2014
Posts: 3
|
Re: Headlights/Taillights not working after installing new lights and wiring
Just tried this, but it blows the fuse every time?
|
|
|
|
|
09-28-2014, 04:43 PM
|
#5 |
|
Guest
Posts: n/a
|
Re: Headlights/Taillights not working after installing new lights and wiring
you are giving it to much power
connect like this if you have a 36v cart do not ground to frame always go to battery pack |
|
|
|
09-29-2014, 04:59 AM
|
#6 |
|
Not Yet Wild
 Join Date: Oct 2013
Location: Texas
Posts: 70
|
Re: Headlights/Taillights not working after installing new lights and wiring
If you are putting LED lights, you may have burned them out with putting 36V to the 12V expected voltage. LEDs are made with a voltage range maximum - In this case probably around 14 V maximum. Either the wiring source should be one battery or from a voltage reducer (36/48V to 12V.
|
|
|
|
|
09-29-2014, 06:44 AM
|
#7 | |
|
Guest
Posts: n/a
|
Re: Headlights/Taillights not working after installing new lights and wiring
Quote:
 |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Headlights quit working, tail lights still work. Help | Electric Yamaha | |||
| Headlights and taillights - not working | Gas Club Car | |||
| Headlights and taillights not working | Electric Club Car | |||
| Headlights,taillights and Brake lights Oh MY! | Electric Club Car | |||
| TXT Headlights/Taillights Kit | Golf Carts and Parts | |||
Linear Mode
