|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-07-2013, 10:44 AM | #1 |
Not Yet Wild
Join Date: May 2013
Posts: 13
|
ezgo model ? and solenoid amprage
hello all i have a ezgo electric cart with manufacturing code F0997 trying to figure out what year it is to find service info and the serial number is 1023364 also need to know what amp rating the solenoid should be? im pulling my hair out ( what io have left ) any help thanks.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-07-2013, 11:04 AM | #2 |
Guest
Posts: n/a
|
Re: ezgo model ? and solenoid amprage
Make: TXT
Type: Electric 36 V Model: TXT Standard (DCS) Year: 1997 click link ---> http://www.shopezgo.com/common/templ...ialnumber.aspx http://www.shopezgo.com/golf-cart/El...stem/Solenoids |
06-07-2013, 11:11 AM | #3 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: ezgo model ? and solenoid amprage
This is the way a cart with that serial number left the factory:
Make: TXT Type: Electric 36 V Model: TXT Standard (DCS) Year: 1997 The attached manuals should cover that cart. |
06-07-2013, 11:17 AM | #4 |
Guest
Posts: n/a
|
Re: ezgo model ? and solenoid amprage
|
06-07-2013, 11:33 AM | #5 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: ezgo model ? and solenoid amprage
You were posting while I was uploading the manuals.
|
06-07-2013, 11:37 AM | #6 |
Not Yet Wild
Join Date: May 2013
Posts: 13
|
Re: ezgo model ? and solenoid amprage
what by chance is the amp rating on the solenoid. one i got is 36v 40 amp
|
06-07-2013, 11:43 AM | #7 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: ezgo model ? and solenoid amprage
That sounds mighty low, the controller puts out either 275A or 300A.
I believe the stock solenoid on a DCS was 80A, but I'd use one in the 200A range. |
06-07-2013, 05:51 PM | #8 |
Not Yet Wild
Join Date: May 2013
Posts: 13
|
Re: ezgo model ? and solenoid amprage
got one coming thanks.
|
06-14-2013, 12:03 PM | #9 |
Not Yet Wild
Join Date: May 2013
Posts: 13
|
Re: ezgo model ? and solenoid amprage
hey any one got a install instructions on a 36v 200a ( part number 1142) from nivel catalog. this one has a post. and a ground on little middle post, not sure if i need run a dedicated ground to it? also how to test the resistor diode? and if it is vital for the car to run?
|
06-14-2013, 02:07 PM | #10 |
Not Yet Wild
Join Date: May 2013
Posts: 13
|
Re: ezgo model ? and solenoid amprage
ok figured out the wiring. found reed swith is bad. jumped it and cart moves 1" 2" then motor heats up an dstarts smoking anyone have any experiance. could it be a open in the windings or brush issue?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
how to tell what EZGO model it is. | Electric EZGO | |||
'87 Model - 5th Solenoid Burning Wire | Electric Club Car | |||
EZGO PDS model | Electric EZGO | |||
EZGO PCX-956 model | Electric EZGO | |||
Need Help with 89 gas model EZGO | Gas EZGO |