Test ing a sepex mtr

kantuckian · 01-13-2014, 01:16 PM

Can anyone tell me how to test a 48 volt club car sepex motor

Stevegrmich · 01-13-2014, 01:25 PM

To test run a Sep-Ex (regen) motor

Remove all cables from the motor; connect a jumper from A1 to F1 and a jumper from A2 to F2. Connect 12 to 24 volts, positive @ A1/F1 and negative @ A2/F2. Swap F1 and F2 to change rotation direction.

NOTE: some Sep-Ex motors are labeled S1 & S2 in place of F1 & F2

CAUTION:

Allowing a motor to spin @ high RPM can cause catastrophic failure!

Put vehicle in TOW mode before attempting testing process if vehicle has TOW switch . . .

01-13-2014, 01:16 PM	#1
kantuckian Gone Wild Join Date: Dec 2010 Posts: 635	Test ing a sepex mtr Can anyone tell me how to test a 48 volt club car sepex motor
kantuckian Gone Wild Join Date: Dec 2010 Posts: 635

01-13-2014, 01:25 PM	#2
Stevegrmich Medicare Recipient Join Date: Jun 2011 Location: West Michigan Posts: 3,541	Re: Test ing a sepex mtr To test run a Sep-Ex (regen) motor Remove all cables from the motor; connect a jumper from A1 to F1 and a jumper from A2 to F2. Connect 12 to 24 volts, positive @ A1/F1 and negative @ A2/F2. Swap F1 and F2 to change rotation direction. NOTE: some Sep-Ex motors are labeled S1 & S2 in place of F1 & F2 CAUTION: Allowing a motor to spin @ high RPM can cause catastrophic failure! Put vehicle in TOW mode before attempting testing process if vehicle has TOW switch . . .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
How to bench test a SEPEX motor?	Electric Club Car
sepex charger won't come on	Electric EZGO
How basic can sepex get?	Electric Club Car
Pro or Con on Sepex!!!	Extreme DC!
What is best, Series or SepEx?	Extreme DC!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum