|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
12-07-2018, 03:17 PM | #1 |
Not Yet Wild
Join Date: May 2016
Posts: 21
|
Stealth Controller volts
Working on a 09 Stealth. Trying to confirm controller failure. The feed cable from the controller to the F&R Switch is only showing 5vdc at the controller, when the accel. pedal is pressed the volts go to 0vdc, cart will not move. My common sense says it should be 48vdc+ feeding the F&R Switch. All the cables on the F&R are showing the same. Help!
Last edited by mscountry; 12-07-2018 at 04:55 PM.. Reason: miss spelled |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Stock PDS controller on 42/48 volts ? | Electric EZGO | |||
Wiring a controller on Stealth 4x4 | Electric Club Car | |||
Stealth Apache XR Convert from 48 to 64 volts | Lifted Golf Carts | |||
Looking for Controller for 2009 Stealth Patriot LSV | Lifted Golf Carts | |||
42 Volts / Stock DCS Controller ? | Electric EZGO |