|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-11-2020, 04:17 PM | #11 |
Gone Wild
Join Date: Feb 2020
Posts: 150
|
Re: There has to be a better way
34 ohms.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-11-2020, 04:18 PM | #12 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: There has to be a better way
|
04-11-2020, 04:34 PM | #13 |
Gone Wild
Join Date: Feb 2020
Posts: 150
|
Re: There has to be a better way
Yeah that’s for top speed. I trying to get any speed
|
04-11-2020, 04:39 PM | #14 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: There has to be a better way
If the throttle is going from nearly 5k and UP it's not going to run.
|
04-11-2020, 04:54 PM | #15 |
Gone Wild
Join Date: Feb 2020
Posts: 150
|
Re: There has to be a better way
Well I’ve found a manual for this controller (I think) and it says the pot box needs to have an output of 0-5k. Which contradicts what the guy who sold me the controller. He said that it requires 5k-0. I had to rewrire this one to do 5k-0....guess I need swap it back.
|
04-11-2020, 06:03 PM | #16 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: There has to be a better way
If that controller came out of a 1995 - 1997 or so 48v Club Car it is 5k-0. (Unless early 95 but it would be black)
|
04-11-2020, 06:38 PM | #17 |
Gone Wild
Join Date: Feb 2020
Posts: 150
|
Re: There has to be a better way
Yeah it came out of a club car. He upgraded and sold this one. I’m guessing that there might be a little bit more to the wiring that the diagram I followed.
|
04-11-2020, 06:48 PM | #18 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: There has to be a better way
If the solenoid is clicking it can't be but so much wrong. You need to get the throttle straightened out first. I would jack the rear wheels off the ground until you do.
|
04-11-2020, 08:32 PM | #19 |
Gone Wild
Join Date: Feb 2020
Posts: 150
|
Re: There has to be a better way
Wheels are up. How do it test the controller?
And because this is a controller from a club car do I need to follow a different wiring diagram? I followed the ez-go one I found on here. |
04-11-2020, 08:45 PM | #20 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: There has to be a better way
Why would you want to test the controller when you have yet to get a signal to it?
|